Guide to the Secure Configuration of Red Hat Enterprise Linux 6

with profile Upstream STIG for RHEL 6 Server

This guide presents a catalog of security-relevant configuration settings for Red Hat Enterprise Linux 6. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at http://fedorahosted.org/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in any operational scenario. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG for RHEL 6, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.

This benchmark is a direct port of a SCAP Security Guide benchmark developed for Red Hat Enterprise Linux. It has been modified through an automated process to remove specific dependencies on Red Hat Enterprise Linux and to function with CentOS. The result is a generally useful SCAP Security Guide benchmark with the following caveats:

  • CentOS is not an exact copy of Red Hat Enterprise Linux. There may be configuration differences that produce false positives and/or false negatives. If this occurs please file a bug report.
  • CentOS has its own build system, compiler options, patchsets, and is a community supported, non-commercial operating system. CentOS does not inherit certifications or evaluations from Red Hat Enterprise Linux. As such, some configuration rules (such as those requiring FIPS 140-2 encryption) will continue to fail on CentOS.

Members of the CentOS community are invited to participate in OpenSCAP and SCAP Security Guide development. Bug reports and patches can be sent to GitHub: https://github.com/OpenSCAP/scap-security-guide. The mailing list is at https://fedorahosted.org/mailman/listinfo/scap-security-guide.

Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.
Profile TitleUpstream STIG for RHEL 6 Server
Profile IDxccdf_org.ssgproject.content_profile_stig-rhel6-server-upstream

Revision History

Current version: 0.9

  • draft (as of 2015-07-30)

Platforms

  • cpe:/o:redhat:enterprise_linux:6
  • cpe:/o:centos:centos:6
  • cpe:/o:redhat:enterprise_linux:6::client

Table of Contents

  1. System Settings
    1. Installing and Maintaining Software
    2. File Permissions and Masks
    3. SELinux
    4. Account and Access Control
    5. Network Configuration and Firewalls
    6. Configure Syslog
    7. System Accounting with auditd
  2. Services
    1. Obsolete Services
    2. Base Services
    3. Cron and At Daemons
    4. SSH Server
    5. X Window System
    6. Avahi Server
    7. DHCP
    8. Network Time Protocol
    9. Mail Server Software
    10. LDAP
    11. NFS and RPC
    12. FTP Server
    13. Samba(SMB) Microsoft Windows File Sharing Server
    14. SNMP Server

Checklist

contains 224 rules

System Settingsgroup

contains 171 rules

Installing and Maintaining Softwaregroup

The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.

contains 16 rules

Disk Partitioninggroup

To ensure separation and protection of data, there are top-level system directories which should be placed on their own physical partition or logical volume. The installer's default partitioning scheme creates separate logical volumes for /, /boot, and swap.

  • If starting with any of the default layouts, check the box to "Review and modify partitioning." This allows for the easy creation of additional logical volumes inside the volume group already created, though it may require making /'s logical volume smaller to create space. In general, using logical volumes is preferable to using partitions because they can be more easily adjusted later.
  • If creating a custom layout, create the partitions mentioned in the previous paragraph (which the installer will require anyway), as well as separate ones described in the following sections.
If a system has already been installed, and the default partitioning scheme was used, it is possible but nontrivial to modify it to create separate logical volumes for the directories listed above. The Logical Volume Manager (LVM) makes this possible. See the LVM HOWTO at http://tldp.org/HOWTO/LVM-HOWTO/ for more detailed information on LVM.

contains 6 rules

Ensure /tmp Located On Separate Partitionrule

The /tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.

Rationale:

The /tmp partition is used as temporary storage by many programs. Placing /tmp in its own partition enables the setting of more restrictive mount options, which can help protect programs which use it.

identifiers:  CCE-26435-8, DISA FSO RHEL-06-000001

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, 1208, Test attestation on 20120928 by MM

Ensure /var Located On Separate Partitionrule

The /var directory is used by daemons and other system services to store frequently-changing data. Ensure that /var has its own partition or logical volume at installation time, or migrate it using LVM.

Rationale:

Ensuring that /var is mounted on its own partition enables the setting of more restrictive mount options. This helps protect system services such as daemons or other programs which use it. It is not uncommon for the /var directory to contain world-writable directories installed by other software packages.

identifiers:  CCE-26639-5, DISA FSO RHEL-06-000002

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, 1208, Test attestation on 20120928 by MM

Ensure /var/log Located On Separate Partitionrule

System logs are stored in the /var/log directory. Ensure that it has its own partition or logical volume at installation time, or migrate it using LVM.

Rationale:

Placing /var/log in its own partition enables better separation between log files and other files in /var/.

identifiers:  CCE-26215-4, DISA FSO RHEL-06-000003

references:  AU-9, 1208, Test attestation on 20120928 by MM

Ensure /var/log/audit Located On Separate Partitionrule

Audit logs are stored in the /var/log/audit directory. Ensure that it has its own partition or logical volume at installation time, or migrate it later using LVM. Make absolutely certain that it is large enough to store all audit logs that will be created by the auditing daemon.

Rationale:

Placing /var/log/audit in its own partition enables better separation between audit files and other files, and helps ensure that auditing cannot be halted due to the partition running out of space.

identifiers:  CCE-26436-6, DISA FSO RHEL-06-000004

references:  AU-4, AU-9, 137, 138, 1208, Test attestation on 20120928 by MM

Ensure /home Located On Separate Partitionrule

If user home directories will be stored locally, create a separate partition for /home at installation time (or migrate it later using LVM). If /home will be mounted from another system such as an NFS server, then creating a separate partition is not necessary at installation time, and the mountpoint can instead be configured later.

Rationale:

Ensuring that /home is mounted on its own partition enables the setting of more restrictive mount options, and also helps ensure that users cannot trivially fill partitions used for log or audit data storage.

identifiers:  CCE-26557-9, DISA FSO RHEL-06-000007

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, 1208, Test attestation on 20120928 by MM

Encrypt Partitionsrule

Red Hat Enterprise Linux 6 natively supports partition encryption through the Linux Unified Key Setup-on-disk-format (LUKS) technology. The easiest way to encrypt a partition is during installation time.

For manual installations, select the Encrypt checkbox during partition creation to encrypt the partition. When this option is selected the system will prompt for a passphrase to use in decrypting the partition. The passphrase will subsequently need to be entered manually every time the system boots.

For automated/unattended installations, it is possible to use Kickstart by adding the --encrypted and --passphrase= options to the definition of each partition to be encrypted. For example, the following line would encrypt the root partition:

part / --fstype=ext3 --size=100 --onpart=hda1 --encrypted --passphrase=PASSPHRASE
Any PASSPHRASE is stored in the Kickstart in plaintext, and the Kickstart must then be protected accordingly. Omitting the --passphrase= option from the partition definition will cause the installer to pause and interactively ask for the passphrase during installation.

Detailed information on encrypting partitions using LUKS can be found on the Red Hat Documentation web site:
https://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Security_Guide/sect-Security_Guide-LUKS_Disk_Encryption.html

Rationale:

The risk of a system's physical compromise, particularly mobile systems such as laptops, places its data at risk of compromise. Encrypting this data mitigates the risk of its loss if the system is lost.

identifiers:  CCE-27596-6, DISA FSO RHEL-06-000275

references:  SC-13, SC-28, 1019, 1199, 1200

Updating Softwaregroup

The yum command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

Red Hat Enterprise Linux systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using yum or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

contains 4 rules

Ensure Red Hat GPG Key Installedrule

To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. To install the Red Hat GPG key, run:

$ sudo rhn_register
If the system is not connected to the Internet or an RHN Satellite, then install the Red Hat GPG key from trusted media such as the Red Hat installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY

Rationale:

The Red Hat GPG key is necessary to cryptographically verify packages are from Red Hat.

identifiers:  CCE-26506-6, DISA FSO RHEL-06-000008

references:  SI-7, MA-1(b), 351, Test attestation on 20120928 by MM

Remediation script:
# The two fingerprints below are retrieved from https://access.redhat.com/security/team/key
readonly REDHAT_RELEASE_2_FINGERPRINT="567E 347A D004 4ADE 55BA 8A5F 199E 2F91 FD43 1D51"
readonly REDHAT_AUXILIARY_FINGERPRINT="43A6 E49C 4A38 F4BE 9ABF 2A53 4568 9C88 2FA6 58E0"
# Location of the key we would like to import (once it's integrity verified)
readonly REDHAT_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$REDHAT_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error)
  IFS=$'\n' GPG_OUT=($(gpg --with-fingerprint "${REDHAT_RELEASE_KEY}"))
  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    for ITEM in "${GPG_OUT[@]}"
    do
      # Filter just hexadecimal fingerprints from gpg's output from
      # processing of a key file
      RESULT=$(echo ${ITEM} | sed -n "s/[[:space:]]*Key fingerprint = \(.*\)/\1/p" | tr -s '[:space:]')
      # If fingerprint matches Red Hat's release 2 or auxiliary key import the key
      if [[ ${RESULT} ]] && ([[ ${RESULT} = "${REDHAT_RELEASE_2_FINGERPRINT}" ]] || \
                             [[ ${RESULT} = "${REDHAT_AUXILIARY_FINGERPRINT}" ]])
      then
        rpm --import "${REDHAT_RELEASE_KEY}"
      fi
    done
  fi
fi

Ensure gpgcheck Enabled In Main Yum Configurationrule

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the following line appears in /etc/yum.conf in the [main] section:

gpgcheck=1

Rationale:

Ensuring the validity of packages' cryptographic signatures prior to installation ensures the authenticity of the software and protects against malicious tampering.

identifiers:  CCE-26709-6, DISA FSO RHEL-06-000013

references:  SI-7, MA-1(b), 352, 663, Test attestation on 20120928 by MM

Ensure gpgcheck Enabled For All Yum Package Repositoriesrule

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:

gpgcheck=0

Rationale:

Ensuring all packages' cryptographic signatures are valid prior to installation ensures the authenticity of the software and protects against malicious tampering.

identifiers:  CCE-26647-8, DISA FSO RHEL-06-000015

references:  SI-7, MA-1(b), 352, 663, Test attestation on 20120928 by MM

Ensure Software Patches Installedrule

If the system is joined to the Red Hat Network, a Red Hat Satellite Server, or a yum server, run the following command to install updates:

$ sudo yum update
If the system is not configured to use one of these sources, updates (in the form of RPM packages) can be manually downloaded from the Red Hat Network and installed using rpm.

Rationale:

Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities.

identifiers:  CCE-27635-2, DISA FSO RHEL-06-000011

references:  SI-2, MA-1(b), 1227, 1233, Test attestation on 20120928 by MM

Software Integrity Checkinggroup

Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of file metadata (such as hashes) and compares these to current system files in order to detect changes. The RPM package management system can conduct integrity checks by comparing information in its metadata database with files installed on the system.

Integrity checking cannot prevent intrusions, but can detect that they have occurred. Requirements for software integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.

contains 6 rules

Verify Integrity with AIDEgroup

AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and then again after any software update. AIDE is highly configurable, with further configuration information located in /usr/share/doc/aide-VERSION.

contains 2 rules

Install AIDErule

Install the AIDE package with the command:

$ sudo yum install aide

Rationale:

The AIDE package must be installed if it is to be available for integrity checking.

identifiers:  CCE-27024-9, DISA FSO RHEL-06-000016

references:  CM-3(d), CM-3(e), CM-6(d), SC-28, SI-7, 1069, Test attestation on 20121024 by DS

Remediation script:
yum -y install aide

Configure Periodic Execution of AIDErule

To implement a daily execution of AIDE at 4:05am using cron, add the following line to /etc/crontab:

05 4 * * * root /usr/sbin/aide --check
AIDE can be executed periodically through other means; this is merely one example.

Rationale:

By default, AIDE does not install itself for periodic execution. Periodically running AIDE is necessary to reveal unexpected changes in installed files.

identifiers:  CCE-27222-9, DISA FSO RHEL-06-000306

references:  CM-3(d), CM-3(e), CM-6(d), SC-28, SI-7, 374, 416, 1069, 1263, 1297, 1589

Remediation script:
echo "05 4 * * * root /usr/sbin/aide --check" >> /etc/crontab

Verify Integrity with RPMgroup

The RPM package management system includes the ability to verify the integrity of installed packages by comparing the installed files with information about the files taken from the package metadata stored in the RPM database. Although an attacker could corrupt the RPM database (analogous to attacking the AIDE database as described above), this check can still reveal modification of important files. To list which files on the system differ from what is expected by the RPM database:

$ rpm -qVa
See the man page for rpm to see a complete explanation of each column.

contains 2 rules

Verify and Correct File Permissions with RPMrule

The RPM package management system can check file access permissions of installed software packages, including many that are important to system security. After locating a file with incorrect permissions, run the following command to determine which package owns it:

$ rpm -qf FILENAME
Next, run the following command to reset its permissions to the correct values:
$ sudo rpm --setperms PACKAGENAME

Rationale:

Permissions on system binaries and configuration files that are too generous could allow an unauthorized user to gain privileges that they should not have. The permissions set by the vendor should be maintained. Any deviations from this baseline should be investigated.

identifiers:  CCE-26731-0, DISA FSO RHEL-06-000518

references:  AC-6, CM-6(d), SI-7, 1493, 1494, 1495

Verify File Hashes with RPMrule

The RPM package management system can check the hashes of installed software packages, including many that are important to system security. Run the following command to list which files on the system have hashes that differ from what is expected by the RPM database:

$ rpm -Va | grep '^..5'
A "c" in the second column indicates that a file is a configuration file, which may appropriately be expected to change. If the file was not expected to change, investigate the cause of the change using audit logs or other means. The package can then be reinstalled to restore the file. Run the following command to determine which package owns the file:
$ rpm -qf FILENAME
The package can be reinstalled from a yum repository using the command:
$ sudo yum reinstall PACKAGENAME
Alternatively, the package can be reinstalled from trusted media using the command:
$ sudo rpm -Uvh PACKAGENAME

Rationale:

The hashes of important files like system executables should match the information given by the RPM database. Executables with erroneous hashes could be a sign of nefarious activity on the system.

identifiers:  CCE-27223-7, DISA FSO RHEL-06-000519

references:  CM-6(d), SI-7, 1496

Additional Security Softwaregroup

Additional security software that is not provided or supported by Red Hat can be installed to provide complementary or duplicative security capabilities to those provided by the base platform. Add-on software may not be appropriate for some specialized systems.

contains 2 rules

Install Intrusion Detection Softwarerule

The base Red Hat platform already includes a sophisticated auditing system that can detect intruder activity, as well as SELinux, which provides host-based intrusion prevention capabilities by confining privileged programs and user sessions which may become compromised.
In DoD environments, supplemental intrusion detection tools, such as, the McAfee Host-based Security System, are available to integrate with existing infrastructure. When these supplemental tools interfere with the proper functioning of SELinux, SELinux takes precedence.

Rationale:

Host-based intrusion detection tools provide a system-level defense when an intruder gains access to a system or network.

identifiers:  CCE-27409-2, DISA FSO RHEL-06-000285

references:  SC-7, 1263

Install Virus Scanning Softwarerule

Install virus scanning software, which uses signatures to search for the presence of viruses on the filesystem. The McAfee VirusScan Enterprise for Linux virus scanning tool is provided for DoD systems. Ensure virus definition files are no older than 7 days, or their last release. Configure the virus scanning software to perform scans dynamically on all accessed files. If this is not possible, configure the system to scan all altered files on the system on a daily basis. If the system processes inbound SMTP mail, configure the virus scanner to scan all received mail.

Rationale:

Virus scanning software can be used to detect if a system has been compromised by computer viruses, as well as to limit their spread to other systems.

identifiers:  CCE-27529-7, DISA FSO RHEL-06-000284

references:  SC-28, SI-3, 1239, 1668

File Permissions and Masksgroup

Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access.

Several of the commands in this section search filesystems for files or directories with certain characteristics, and are intended to be run on every local partition on a given system. When the variable PART appears in one of the commands below, it means that the command is intended to be run repeatedly, with the name of each local partition substituted for PART in turn.

The following command prints a list of all ext4 partitions on the local system, which is the default filesystem for Red Hat Enterprise Linux 6 installations:

$ mount -t ext4 | awk '{print $3}'
For any systems that use a different local filesystem type, modify this command as appropriate.

contains 28 rules

Restrict Partition Mount Optionsgroup

System partitions can be mounted with certain options that limit what files on those partitions can do. These options are set in the /etc/fstab configuration file, and can be used to make certain types of malicious behavior more difficult.

contains 1 rule

Add noexec Option to Removable Media Partitionsrule

The noexec mount option prevents the direct execution of binaries on the mounted filesystem. Preventing the direct execution of binaries from removable media (such as a USB key) provides a defense against malicious software that may be present on such untrusted media. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of any removable media partitions.

Rationale:

Allowing users to execute binaries from removable media such as USB keys exposes the system to potential compromise.

identifiers:  CCE-27196-5, DISA FSO RHEL-06-000271

references:  AC-19(a), AC-19(d), AC-19(e), CM-7, MP-2, 87

Restrict Dynamic Mounting and Unmounting of Filesystemsgroup

Linux includes a number of facilities for the automated addition and removal of filesystems on a running system. These facilities may be necessary in many environments, but this capability also carries some risk -- whether direct risk from allowing users to introduce arbitrary filesystems, or risk that software flaws in the automated mount facility itself could allow an attacker to compromise the system.

This command can be used to list the types of filesystems that are available to the currently executing kernel:

$ find /lib/modules/`uname -r`/kernel/fs -type f -name '*.ko'
If these filesystems are not required then they can be explicitly disabled in a configuratio file in /etc/modprobe.d.

contains 2 rules

Disable Modprobe Loading of USB Storage Driverrule

To prevent USB storage devices from being used, configure the kernel module loading system to prevent automatic loading of the USB storage driver. To configure the system to prevent the usb-storage kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install usb-storage /bin/true
This will prevent the modprobe program from loading the usb-storage module, but will not prevent an administrator (or another program) from using the insmod program to load the module manually.

Rationale:

USB storage devices such as thumb drives can be used to introduce malicious software.

identifiers:  CCE-27016-5, DISA FSO RHEL-06-000503

references:  AC-19(a), AC-19(d), AC-19(e), 1250, 85

Remediation script:
echo "install usb-storage /bin/true" > /etc/modprobe.d/usb-storage.conf

Disable the Automounterrule

The autofs daemon mounts and unmounts filesystems, such as user home directories shared via NFS, on demand. In addition, autofs can be used to handle removable media, and the default configuration provides the cdrom device as /misc/cd. However, this method of providing access to removable media is not common, so autofs can almost always be disabled if NFS is not in use. Even if NFS is required, it may be possible to configure filesystem mounts statically by editing /etc/fstab rather than relying on the automounter.

The autofs service can be disabled with the following command:

$ sudo chkconfig autofs off

Rationale:

Disabling the automounter permits the administrator to statically control filesystem mounting through /etc/fstab.

identifiers:  CCE-26976-1, DISA FSO RHEL-06-000526

references:  AC-19(a), AC-19(d), AC-19(e), 1250, 85

Remediation script:
#
# Disable autofs for all run levels
#
/sbin/chkconfig --level 0123456 autofs off

#
# Stop autofs if currently running
#
/sbin/service autofs stop

Verify Permissions on Important Files and Directoriesgroup

Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verified to ensure that no harmful discrepancies have arisen.

contains 21 rules
contains 12 rules

Verify User Who Owns shadow Filerule

To properly set the owner of /etc/shadow, run the command:

$ sudo chown root /etc/shadow

Rationale:

The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.

identifiers:  CCE-26947-2, DISA FSO RHEL-06-000033

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chown root /etc/shadow

Verify Group Who Owns shadow Filerule

To properly set the group owner of /etc/shadow, run the command:

$ sudo chgrp root /etc/shadow

Rationale:

The /etc/shadow file stores password hashes. Protection of this file is critical for system security.

identifiers:  CCE-26967-0, DISA FSO RHEL-06-000034

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chgrp root /etc/shadow

Verify Permissions on shadow Filerule

To properly set the permissions of /etc/shadow, run the command:

$ sudo chmod 0000 /etc/shadow

Rationale:

The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.

identifiers:  CCE-26992-8, DISA FSO RHEL-06-000035

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chmod 0000 /etc/shadow

Verify User Who Owns group Filerule

To properly set the owner of /etc/group, run the command:

$ sudo chown root /etc/group

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

identifiers:  CCE-26822-7, DISA FSO RHEL-06-000042

references:  AC-6, Test attestation on 20121026 by DS

Remediation script:
chown root /etc/group

Verify Group Who Owns group Filerule

To properly set the group owner of /etc/group, run the command:

$ sudo chgrp root /etc/group

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

identifiers:  CCE-26930-8, DISA FSO RHEL-06-000043

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chgrp root /etc/group

Verify Permissions on group Filerule

To properly set the permissions of /etc/group, run the command:

$ sudo chmod 644 /etc/group

Rationale:

The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.

identifiers:  CCE-26954-8, DISA FSO RHEL-06-000044

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chmod 644 /etc/group

Verify User Who Owns gshadow Filerule

To properly set the owner of /etc/gshadow, run the command:

$ sudo chown root /etc/gshadow

Rationale:

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

identifiers:  CCE-27026-4, DISA FSO RHEL-06-000036

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chown root /etc/gshadow

Verify Group Who Owns gshadow Filerule

To properly set the group owner of /etc/gshadow, run the command:

$ sudo chgrp root /etc/gshadow

Rationale:

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

identifiers:  CCE-26975-3, DISA FSO RHEL-06-000037

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chgrp root /etc/gshadow

Verify Permissions on gshadow Filerule

To properly set the permissions of /etc/gshadow, run the command:

$ sudo chmod 0000 /etc/gshadow

Rationale:

The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.

identifiers:  CCE-26951-4, DISA FSO RHEL-06-000038

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chmod 0000 /etc/gshadow

Verify User Who Owns passwd Filerule

To properly set the owner of /etc/passwd, run the command:

$ sudo chown root /etc/passwd

Rationale:

The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.

identifiers:  CCE-26953-0, DISA FSO RHEL-06-000039

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chown root /etc/passwd

Verify Group Who Owns passwd Filerule

To properly set the group owner of /etc/passwd, run the command:

$ sudo chgrp root /etc/passwd

Rationale:

The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.

identifiers:  CCE-26856-5, DISA FSO RHEL-06-000040

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chgrp root /etc/passwd

Verify Permissions on passwd Filerule

To properly set the permissions of /etc/passwd, run the command:

$ sudo chmod 0644 /etc/passwd

Rationale:

If the /etc/passwd file is writable by a group-owner or the world the risk of its compromise is increased. The file contains the list of accounts on the system and associated information, and protection of this file is critical for system security.

identifiers:  CCE-26868-0, DISA FSO RHEL-06-000041

references:  AC-6, 225, Test attestation on 20121026 by DS

Remediation script:
chmod 0644 /etc/passwd

Verify File Permissions Within Some Important Directoriesgroup

Some directories contain files whose confidentiality or integrity is notably important and may also be susceptible to misconfiguration over time, particularly if unpackaged software is installed. As such, an argument exists to verify that files' permissions within these directories remain configured correctly and restrictively.

contains 4 rules

Verify that Shared Library Files Have Restrictive Permissionsrule

System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default:

/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are stored in /lib/modules. All files in these directories should not be group-writable or world-writable. If any file in these directories is found to be group-writable or world-writable, correct its permission with the following command:
$ sudo chmod go-w FILE

Rationale:

Files from shared library directories are loaded into the address space of processes (including privileged ones) or of the kernel itself at runtime. Restrictive permissions are necessary to protect the integrity of the system.

identifiers:  CCE-27381-3, DISA FSO RHEL-06-000045

references:  AC-6, 1499, Test attestation on 20121026 by DS

Remediation script:
DIRS="/lib /lib64 /usr/lib /usr/lib64"
for dirPath in $DIRS; do
	find $dirPath -perm /022 -type f -exec chmod go-w '{}' \;
done

Verify that Shared Library Files Have Root Ownershiprule

System-wide shared library files, which are linked to executables during process load time or run time, are stored in the following directories by default:

/lib
/lib64
/usr/lib
/usr/lib64
Kernel modules, which can be added to the kernel during runtime, are also stored in /lib/modules. All files in these directories should be owned by the root user. If the directory, or any file in these directories, is found to be owned by a user other than root correct its ownership with the following command:
$ sudo chown root FILE

Rationale:

Files from shared library directories are loaded into the address space of processes (including privileged ones) or of the kernel itself at runtime. Proper ownership is necessary to protect the integrity of the system.

identifiers:  CCE-27424-1, DISA FSO RHEL-06-000046

references:  AC-6, 1499, Test attestation on 20130914 by swells

Remediation script:
for LIBDIR in /usr/lib /usr/lib64 /lib /lib64
do
  if [ -d $LIBDIR ]
  then
    find -L $LIBDIR \! -user root -exec chown root {} \; 
  fi
done

Verify that System Executables Have Restrictive Permissionsrule

System executables are stored in the following directories by default:

/bin
/usr/bin
/usr/local/bin
/sbin
/usr/sbin
/usr/local/sbin
All files in these directories should not be group-writable or world-writable. If any file FILE in these directories is found to be group-writable or world-writable, correct its permission with the following command:
$ sudo chmod go-w FILE

Rationale:

System binaries are executed by privileged users, as well as system services, and restrictive permissions are necessary to ensure execution of these programs cannot be co-opted.

identifiers:  CCE-27289-8, DISA FSO RHEL-06-000047

references:  AC-6, 1499

Remediation script:
DIRS="/bin /usr/bin /usr/local/bin /sbin /usr/sbin /usr/local/sbin"
for dirPath in $DIRS; do
	find $dirPath -perm /022 -exec chmod go-w '{}' \;
done

Verify that System Executables Have Root Ownershiprule

System executables are stored in the following directories by default:

/bin
/usr/bin
/usr/local/bin
/sbin
/usr/sbin
/usr/local/sbin
All files in these directories should be owned by the root user. If any file FILE in these directories is found to be owned by a user other than root, correct its ownership with the following command:
$ sudo chown root FILE

Rationale:

System binaries are executed by privileged users as well as system services, and restrictive permissions are necessary to ensure that their execution of these programs cannot be co-opted.

identifiers:  CCE-27623-8, DISA FSO RHEL-06-000048

references:  AC-6, 1499

Remediation script:
find /bin/ \
/usr/bin/ \
/usr/local/bin/ \
/sbin/ \
/usr/sbin/ \
/usr/local/sbin/ \
\! -user root -execdir chown root {} \;

Verify that All World-Writable Directories Have Sticky Bits Setrule

When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may remove any file in the directory. Setting the sticky bit prevents users from removing each other's files. In cases where there is no reason for a directory to be world-writable, a better solution is to remove that permission rather than to set the sticky bit. However, if a directory is used by a particular application, consult that application's documentation instead of blindly changing modes.
To set the sticky bit on a world-writable directory DIR, run the following command:

$ sudo chmod +t DIR

Rationale:

Failing to set the sticky bit on public directories allows unauthorized users to delete files in the directory structure.

The only authorized public directories are those temporary directories supplied with the system, or those designed to be temporary file repositories. The setting is normally reserved for directories used by the system, by users for temporary file storage (such as /tmp), and for directories requiring global read/write access.

identifiers:  CCE-26840-9, DISA FSO RHEL-06-000336

references:  AC-6, Test attestation on 20120929 by swells

Remediation script:
df --local -P | awk {'if (NR!=1) print $6'} \
| xargs -I '{}' find '{}' -xdev -type d \
\( -perm -0002 -a ! -perm -1000 \) 2>/dev/null \
| xargs chmod a+t

Ensure No World-Writable Files Existrule

It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific applications before making changes. Also, monitor for recurring world-writable files, as these may be symptoms of a misconfigured application or user account.

Rationale:

Data in world-writable files can be modified by any user on the system. In almost all circumstances, files can be configured using a combination of user and group permissions to support whatever legitimate access is needed without the risk caused by world-writable files.

identifiers:  CCE-26910-0, DISA FSO RHEL-06-000282

references:  AC-6

Ensure All Files Are Owned by a Userrule

If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate user.

Rationale:

Unowned files do not directly imply a security problem, but they are generally a sign that something is amiss. They may be caused by an intruder, by incorrect software installation or draft software removal, or by failure to remove all files belonging to a deleted account. The files should be repaired so they will not cause problems when accounts are created in the future, and the cause should be discovered and addressed.

identifiers:  CCE-27032-2

references:  AC-6, 224

Ensure All Files Are Owned by a Grouprule

If any files are not owned by a group, then the cause of their lack of group-ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate group.

Rationale:

Unowned files do not directly imply a security problem, but they are generally a sign that something is amiss. They may be caused by an intruder, by incorrect software installation or draft software removal, or by failure to remove all files belonging to a deleted account. The files should be repaired so they will not cause problems when accounts are created in the future, and the cause should be discovered and addressed.

identifiers:  CCE-26872-2

references:  AC-6, 224

Ensure All World-Writable Directories Are Owned by a System Accountrule

All directories in local partitions which are world-writable should be owned by root or another system account. If any world-writable directories are not owned by a system account, this should be investigated. Following this, the files should be deleted or assigned to an appropriate group.

Rationale:

Allowing a user account to own a world-writable directory is undesirable because it allows the owner of that directory to remove or replace any files that may be placed in the directory by other users.

identifiers:  CCE-26642-9, DISA FSO RHEL-06-000337

references:  AC-6, Test attestation on 20120929 by swells

Restrict Programs from Dangerous Execution Patternsgroup

The recommendations in this section are designed to ensure that the system's features to protect against potentially dangerous program execution are activated. These protections are applied at the system initialization or kernel level, and defend against certain types of badly-configured or compromised programs.

contains 4 rules

Daemon Umaskgroup

The umask is a per-process setting which limits the default permissions for creation of new files and directories. The system includes initialization scripts which set the default umask for system daemons.

contains 1 rule

Set Daemon Umaskrule

The file /etc/init.d/functions includes initialization parameters for most or all daemons started at boot time. The default umask of 022 prevents creation of group- or world-writable files. To set the default umask for daemons, edit the following line, inserting 022 or 027 for umask appropriately:

umask 027
Setting the umask to too restrictive a setting can cause serious errors at runtime. Many daemons on the system already individually restrict themselves to a umask of 077 in their own init scripts.

Rationale:

The umask influences the permissions assigned to files created by a process at run time. An unnecessarily permissive umask could result in files being created with insecure permissions.

identifiers:  CCE-27031-4, DISA FSO RHEL-06-000346

references:  AC-6, Test attestation on 20140912 by JL

Remediation script:
var_umask_for_daemons="027"
grep -q ^umask /etc/init.d/functions && \
  sed -i "s/umask.*/umask $var_umask_for_daemons/g" /etc/init.d/functions
if ! [ $? -eq 0 ]; then
    echo "umask $var_umask_for_daemons" >> /etc/init.d/functions
fi

Disable Core Dumpsgroup

A core dump file is the memory image of an executable program when it was terminated by the operating system due to errant behavior. In most cases, only software developers legitimately need to access these files. The core dump files may also contain sensitive information, or unnecessarily occupy large amounts of disk space.

Once a hard limit is set in /etc/security/limits.conf, a user cannot increase that limit within his or her own session. If access to core dumps is required, consider restricting them to only certain users or groups. See the limits.conf man page for more information.

The core dumps of setuid programs are further protected. The sysctl variable fs.suid_dumpable controls whether the kernel allows core dumps from these programs at all. The default value of 0 is recommended.

contains 1 rule

Disable Core Dumps for All Usersrule

To disable core dumps for all users, add the following line to /etc/security/limits.conf:

*     hard   core    0

Rationale:

A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers trying to debug problems.

identifiers:  CCE-27033-0, DISA FSO RHEL-06-000308

references:  SC-5

Remediation script:
echo "*     hard   core    0" >> /etc/security/limits.conf

Enable ExecShieldgroup

ExecShield describes kernel features that provide protection against exploitation of memory corruption errors such as buffer overflows. These features include random placement of the stack and other memory regions, prevention of execution in memory that should only hold data, and special handling of text buffers. These protections are enabled by default and controlled through sysctl variables kernel.exec-shield and kernel.randomize_va_space.

contains 2 rules

Enable ExecShieldrule

To set the runtime status of the kernel.exec-shield kernel parameter, run the following command:

$ sudo sysctl -w kernel.exec-shield=1
If this is not the system's default value, add the following line to /etc/sysctl.conf:
kernel.exec-shield = 1

Rationale:

ExecShield uses the segmentation feature on all x86 systems to prevent execution in memory higher than a certain address. It writes an address as a limit in the code segment descriptor, to control where code can be executed, on a per-process basis. When the kernel places a process's memory regions such as the stack and heap higher than this address, the hardware prevents execution in that address range.

identifiers:  CCE-27007-4, DISA FSO RHEL-06-000079

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for kernel.exec-shield
#
/sbin/sysctl -q -n -w kernel.exec-shield=1

#
# If kernel.exec-shield present in /etc/sysctl.conf, change value to "1"
#	else, add "kernel.exec-shield = 1" to /etc/sysctl.conf
#
if grep --silent ^kernel.exec-shield /etc/sysctl.conf ; then
	sed -i 's/^kernel.exec-shield.*/kernel.exec-shield = 1/g' /etc/sysctl.conf
else
	echo -e "\n# Set kernel.exec-shield to 1 per security requirements" >> /etc/sysctl.conf
	echo "kernel.exec-shield = 1" >> /etc/sysctl.conf
fi

Enable Randomized Layout of Virtual Address Spacerule

To set the runtime status of the kernel.randomize_va_space kernel parameter, run the following command:

$ sudo sysctl -w kernel.randomize_va_space=2
If this is not the system's default value, add the following line to /etc/sysctl.conf:
kernel.randomize_va_space = 2

Rationale:

Address space layout randomization (ASLR) makes it more difficult for an attacker to predict the location of attack code they have introduced into a process's address space during an attempt at exploitation. Additionally, ASLR makes it more difficult for an attacker to know the location of existing code in order to re-purpose it using return oriented programming (ROP) techniques.

identifiers:  CCE-26999-3, DISA FSO RHEL-06-000078

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for kernel.randomize_va_space
#
/sbin/sysctl -q -n -w kernel.randomize_va_space=2

#
# If kernel.randomize_va_space present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.randomize_va_space = 2" to /etc/sysctl.conf
#
if grep --silent ^kernel.randomize_va_space /etc/sysctl.conf ; then
	sed -i 's/^kernel.randomize_va_space.*/kernel.randomize_va_space = 2/g' /etc/sysctl.conf
else
	echo -e "\n# Set kernel.randomize_va_space to 2 per security requirements" >> /etc/sysctl.conf
	echo "kernel.randomize_va_space = 2" >> /etc/sysctl.conf
fi

SELinuxgroup

SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that programs should be limited in what files they can access and what actions they can take.

The default SELinux policy, as configured on RHEL 6, has been sufficiently developed and debugged that it should be usable on almost any Red Hat machine with minimal configuration and a small amount of system administrator training. This policy prevents system services - including most of the common network-visible services such as mail servers, FTP servers, and DNS servers - from accessing files which those services have no valid reason to access. This action alone prevents a huge amount of possible damage from network attacks against services, from trojaned software, and so forth.

This guide recommends that SELinux be enabled using the default (targeted) policy on every Red Hat system, unless that system has unusual requirements which make a stronger policy appropriate.

contains 4 rules

Ensure SELinux Not Disabled in /etc/grub.confrule

SELinux can be disabled at boot time by an argument in /etc/grub.conf. Remove any instances of selinux=0 from the kernel arguments in that file to prevent SELinux from being disabled at boot.

Rationale:

Disabling a major host protection feature, such as SELinux, at boot time prevents it from confining system services at boot time. Further, it increases the chances that it will remain off during system operation.

identifiers:  CCE-26956-3, DISA FSO RHEL-06-000017

references:  AC-3, AC-3(3), AC-6, AU-9, 22, 32, Test attestation on 20121024 by DS

Remediation script:
sed -i --follow-symlinks "s/selinux=0//gI" /etc/grub.conf
sed -i --follow-symlinks "s/enforcing=0//gI" /etc/grub.conf

Ensure SELinux State is Enforcingrule

The SELinux state should be set to enforcing at system boot time. In the file /etc/selinux/config, add or correct the following line to configure the system to boot into enforcing mode:

SELINUX=enforcing

Rationale:

Setting the SELinux state to enforcing ensures SELinux is able to confine potentially compromised processes to the security policy, which is designed to prevent them from causing damage to the system or further elevating their privileges.

identifiers:  CCE-26969-6, DISA FSO RHEL-06-000020

references:  AC-3, AC-3(3), AC-4, AC-6, AU-9, 22, 32, 26, Test attestation on 20121024 by DS

Remediation script:
var_selinux_state="enforcing"
grep -q ^SELINUX= /etc/selinux/config && \
  sed -i "s/SELINUX=.*/SELINUX=$var_selinux_state/g" /etc/selinux/config
if ! [ $? -eq 0 ]; then
    echo "SELINUX=$var_selinux_state" >> /etc/selinux/config
fi

Configure SELinux Policyrule

The SELinux targeted policy is appropriate for general-purpose desktops and servers, as well as systems in many other roles. To configure the system to use this policy, add or correct the following line in /etc/selinux/config:

SELINUXTYPE=targeted
Other policies, such as mls, provide additional security labeling and greater confinement but are not compatible with many general-purpose use cases.

Rationale:

Setting the SELinux policy to targeted or a more specialized policy ensures the system will confine processes that are likely to be targeted for exploitation, such as network or system services. Note: During the development or debugging of SELinux modules, it is common to temporarily place non-production systems in permissive mode. In such temporary cases, SELinux policies should be developed, and once work is completed, the system should be reconfigured to targeted.

identifiers:  CCE-26875-5, DISA FSO RHEL-06-000023

references:  AC-3, AC-3(3), AC-4, AC-6, AU-9, 22, 32, Test attestation on 20121024 by DS

Remediation script:
var_selinux_policy_name="targeted"
grep -q ^SELINUXTYPE /etc/selinux/config && \
  sed -i "s/SELINUXTYPE=.*/SELINUXTYPE=$var_selinux_policy_name/g" /etc/selinux/config
if ! [ $? -eq 0 ]; then
    echo "SELINUXTYPE=$var_selinux_policy_name" >> /etc/selinux/config
fi

Ensure No Device Files are Unlabeled by SELinuxrule

Device files, which are used for communication with important system resources, should be labeled with proper SELinux types. If any device files carry the SELinux type unlabeled_t, investigate the cause and correct the file's context.

Rationale:

If a device file carries the SELinux type unlabeled_t, then SELinux cannot properly restrict access to the device file.

identifiers:  CCE-26774-0, DISA FSO RHEL-06-000025

references:  AC-6, AU-9, CM-7, 22, 32, Test attestation on 20121024 by DS

Account and Access Controlgroup

In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under RHEL 6.

contains 51 rules

Protect Accounts by Restricting Password-Based Logingroup

Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.

contains 15 rules

Restrict Root Loginsgroup

Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.

contains 4 rules

Restrict Serial Port Root Loginsrule

To restrict root logins on serial ports, ensure lines of this form do not appear in /etc/securetty:

ttyS0
ttyS1

Rationale:

Preventing direct root login to serial port interfaces helps ensure accountability for actions taken on the systems using the root account.

identifiers:  CCE-27047-0, DISA FSO RHEL-06-000028

references:  AC-6(2), 770, Test attestation on 20121024 by DS

Ensure that System Accounts Do Not Run a Shell Upon Loginrule

Some accounts are not associated with a human user of the system, and exist to perform some administrative function. Should an attacker be able to log into these accounts, they should not be granted access to a shell.

The login shell for each local account is stored in the last field of each line in /etc/passwd. System accounts are those user accounts with a user ID less than 500. The user ID is stored in the third field. If any system account SYSACCT (other than root) has a login shell, disable it with the command:

$ sudo usermod -s /sbin/nologin SYSACCT

warning  Do not perform the steps in this section on the root account. Doing so might cause the system to become inaccessible.
Rationale:

Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.

identifiers:  CCE-26966-2

references:  AC-2, 178, Test attestation on 20121024 by DS

Verify Only Root Has UID 0rule

If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.

Rationale:

An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.

identifiers:  CCE-26971-2, DISA FSO RHEL-06-000032

references:  AC-6, IA-2(1), 366, Test attestation on 20121024 by DS

Remediation script:
awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs passwd -l

Verify Proper Storage and Existence of Password Hashesgroup

By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

contains 4 rules

Prevent Log In to Accounts With Empty Passwordrule

If an account is configured for password authentication but does not have an assigned password, it may be possible to log onto the account without authentication. Remove any instances of the nullok option in /etc/pam.d/system-auth to prevent logins with empty passwords.

Rationale:

If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.

identifiers:  CCE-27038-9, DISA FSO RHEL-06-000030

references:  IA-5(b), IA-5(c), IA-5(1)(a), Test attestation on 20121024 by DS

Remediation script:
sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/system-auth

Verify All Account Password Hashes are Shadowedrule

If any password hashes are stored in /etc/passwd (in the second field, instead of an x), the cause of this misconfiguration should be investigated. The account should have its password reset and the hash should be properly stored, or the account should be deleted entirely.

Rationale:

The hashes for all user account passwords should be stored in the file /etc/shadow and never in /etc/passwd, which is readable by all users.

identifiers:  CCE-26476-2, DISA FSO RHEL-06-000031

references:  IA-5(h), 201, Test attestation on 20121024 by DS

All GIDs referenced in /etc/passwd must be defined in /etc/grouprule

Add a group to the system for each GID referenced without a corresponding group.

Rationale:

Inconsistency in GIDs between /etc/passwd and /etc/group could lead to a user having unintended rights.

identifiers:  CCE-27379-7, DISA FSO RHEL-06-000294

references:  366, Test attestation on 20121024 by DS

Verify No netrc Files Existrule

The .netrc files contain login information used to auto-login into FTP servers and reside in the user's home directory. These files may contain unencrypted passwords to remote FTP servers making them susceptible to access by unauthorized users and should not be used. Any .netrc files should be removed.

Rationale:

Unencrypted passwords for remote FTP servers may be stored in .netrc files. DoD policy requires passwords be encrypted in storage and not used in access scripts.

identifiers:  CCE-27225-2, DISA FSO RHEL-06-000347

references:  IA-5(h), AC-3, 196

Set Password Expiration Parametersgroup

The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:

$ sudo chage -M 180 -m 7 -W 7 USER

contains 4 rules
contains 3 rules

Protect Accounts by Configuring PAMgroup

PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.

warning  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
warning  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at http://www.kernel.org/pub/linux/libs/pam/Linux-PAM-html/sag-configuration-file.html.
contains 15 rules

Set Password Quality Requirementsgroup

The default pam_cracklib PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes.

The pam_passwdqc PAM module also provides the ability to enforce stringent password strength requirements. It is provided in an RPM of the same name.

The man pages pam_cracklib(8) and pam_passwdqc(8) provide information on the capabilities and configuration of each.

contains 7 rules

Set Password Quality Requirements, if using pam_cracklibgroup

The pam_cracklib PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_cracklib to require at least one uppercase character, lowercase character, digit, and other (special) character, locate the following line in /etc/pam.d/system-auth:

password requisite pam_cracklib.so try_first_pass retry=3
and then alter it to read:
password required pam_cracklib.so try_first_pass retry=3 maxrepeat=3 minlen=14 dcredit=-1 ucredit=-1 ocredit=-1 lcredit=-1 difok=4
If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

warning  Note that the password quality requirements are not enforced for the root account for some reason.
contains 7 rules

Set Password Retry Prompts Permitted Per-Sessionrule

To configure the number of retry prompts that are permitted per-session:

Edit the pam_cracklib.so statement in /etc/pam.d/system-auth to show retry=3, or a lower value if site policy is more restrictive.

The DoD requirement is a maximum of 3 prompts per session.

Rationale:

Setting the password retry prompts that are permitted on a per-session basis to a low value requires some software, such as SSH, to re-connect. This can slow down and draw additional attention to some types of password-guessing attacks. Note that this is different from account lockout, which is provided by the pam_faillock module.

identifiers:  CCE-27123-9

references:  IA-5(c), 1092, Test attestation on 20121024 by DS

Set Password to Maximum of Three Consecutive Repeating Charactersrule

The pam_cracklib module's maxrepeat parameter controls requirements for consecutive repeating characters. When set to a positive number, it will reject passwords which contain more than that number of consecutive characters. Add maxrepeat=3 after pam_cracklib.so to prevent a run of (3 + 1) or more identical characters:

password required pam_cracklib.so maxrepeat=3

Rationale:

Passwords with excessive repeating characters may be more vulnerable to password-guessing attacks.

identifiers:  CCE-27227-8, DISA FSO RHEL-06-000299

references:  IA-5(c), 366

Remediation script:
var_password_pam_maxrepeat="3"
if grep -q "maxrepeat=" /etc/pam.d/system-auth; then   
	sed -i --follow-symlink "s/\(maxrepeat *= *\).*/\1$var_password_pam_maxrepeat/" /etc/pam.d/system-auth
else
	sed -i --follow-symlink "/pam_cracklib.so/ s/$/ maxrepeat=$var_password_pam_maxrepeat/" /etc/pam.d/system-auth
fi

Set Password Strength Minimum Digit Charactersrule

The pam_cracklib module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_cracklib will grant +1 additional length credit for each digit. Add dcredit=-1 after pam_cracklib.so to require use of a digit in passwords.

Rationale:

Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.

identifiers:  CCE-26374-9, DISA FSO RHEL-06-000056

references:  IA-5(b), IA-5(c), 194, 194, Test attestation on 20121024 by DS

Remediation script:
var_password_pam_dcredit="1"
if grep -q "dcredit=" /etc/pam.d/system-auth; then
	sed -i --follow-symlink "s/\(dcredit *= *\).*/\1$var_password_pam_dcredit/" /etc/pam.d/system-auth
else
	sed -i --follow-symlink "/pam_cracklib.so/ s/$/ dcredit=$var_password_pam_dcredit/" /etc/pam.d/system-auth
fi

Set Password Strength Minimum Uppercase Charactersrule

The pam_cracklib module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each uppercase character. Add ucredit=-1 after pam_cracklib.so to require use of an upper case character in passwords.

Rationale:

Requiring a minimum number of uppercase characters makes password guessing attacks more difficult by ensuring a larger search space.

identifiers:  CCE-26601-5, DISA FSO RHEL-06-000057

references:  IA-5(b), IA-5(c), IA-5(1)(a), 192, Test attestation on 20121024 by DS

Remediation script:
var_password_pam_ucredit="1"
if grep -q "ucredit=" /etc/pam.d/system-auth; then   
	sed -i --follow-symlink "s/\(ucredit *= *\).*/\1$var_password_pam_ucredit/" /etc/pam.d/system-auth
else
	sed -i --follow-symlink "/pam_cracklib.so/ s/$/ ucredit=$var_password_pam_ucredit/" /etc/pam.d/system-auth
fi

Set Password Strength Minimum Special Charactersrule

The pam_cracklib module's ocredit= parameter controls requirements for usage of special (or ``other'') characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each special character. Add ocredit=1 after pam_cracklib.so to require use of a special character in passwords.

Rationale:

Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.

identifiers:  CCE-26409-3, DISA FSO RHEL-06-000058

references:  IA-5(b), IA-5(c), IA-5(1)(a), 1619, 266, Test attestation on 20121024 by DS

Remediation script:
var_password_pam_ocredit="1"
if grep -q "ocredit=" /etc/pam.d/system-auth; then   
	sed -i --follow-symlink "s/\(ocredit *= *\).*/\1$var_password_pam_ocredit/" /etc/pam.d/system-auth
else
	sed -i --follow-symlink "/pam_cracklib.so/ s/$/ ocredit=$var_password_pam_ocredit/" /etc/pam.d/system-auth
fi

Set Password Strength Minimum Lowercase Charactersrule

The pam_cracklib module's lcredit= parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each lowercase character. Add lcredit=-1 after pam_cracklib.so to require use of a lowercase character in passwords.

Rationale:

Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.

identifiers:  CCE-26631-2, DISA FSO RHEL-06-000059

references:  IA-5(b), IA-5(c), IA-5(1)(a), 193, Test attestation on 20121024 by DS

Remediation script:
var_password_pam_lcredit="1"
if grep -q "lcredit=" /etc/pam.d/system-auth; then   
	sed -i --follow-symlink "s/\(lcredit *= *\).*/\1$var_password_pam_lcredit/" /etc/pam.d/system-auth
else
	sed -i --follow-symlink "/pam_cracklib.so/ s/$/ lcredit=$var_password_pam_lcredit/" /etc/pam.d/system-auth
fi

Set Password Strength Minimum Different Charactersrule

The pam_cracklib module's difok parameter controls requirements for usage of different characters during a password change. Add difok=3 after pam_cracklib.so to require differing characters when changing passwords. The DoD requirement is 4.

Rationale:

Requiring a minimum number of different characters during password changes ensures that newly changed passwords should not resemble previously compromised ones. Note that passwords which are changed on compromised systems will still be compromised, however.

identifiers:  CCE-26615-5, DISA FSO RHEL-06-000060

references:  IA-5(b), IA-5(c), IA-5(1)(b), 195, Test attestation on 20121024 by DS

Remediation script:
var_password_pam_difok="3"
if grep -q "difok=" /etc/pam.d/system-auth; then   
	sed -i --follow-symlink "s/\(difok *= *\).*/\1$var_password_pam_difok/" /etc/pam.d/system-auth
else
	sed -i --follow-symlink "/pam_cracklib.so/ s/$/ difok=$var_password_pam_difok/" /etc/pam.d/system-auth
fi

Set Lockouts for Failed Password Attemptsgroup

The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

warning  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.
contains 4 rules

Set Deny For Failed Password Attemptsrule

To configure the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • Add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=3 unlock_time=604800 fail_interval=900
  • Add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=3 unlock_time=604800 fail_interval=900
  • Add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so

Rationale:

Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks.

identifiers:  CCE-26844-1, DISA FSO RHEL-06-000061

references:  AC-7(a), 44

Remediation script:
var_accounts_passwords_pam_faillock_deny="3"
AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pamFile in "${AUTH_FILES[@]}"
do
	
	# pam_faillock.so already present?
	if grep -q "^auth.*pam_faillock.so.*" $pamFile; then

		# pam_faillock.so present, deny directive present?
		if grep -q "^auth.*[default=die].*pam_faillock.so.*authfail.*deny=" $pamFile; then

			# both pam_faillock.so & deny present, just correct deny directive value
			sed -i --follow-symlink "s/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\(deny *= *\).*/\1\2$var_accounts_passwords_pam_faillock_deny/" $pamFile
			sed -i --follow-symlink "s/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\(deny *= *\).*/\1\2$var_accounts_passwords_pam_faillock_deny/" $pamFile

		# pam_faillock.so present, but deny directive not yet
		else

			# append correct deny value to appropriate places
			sed -i --follow-symlink "/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ deny=$var_accounts_passwords_pam_faillock_deny/" $pamFile
			sed -i --follow-symlink "/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ deny=$var_accounts_passwords_pam_faillock_deny/" $pamFile
		fi

	# pam_faillock.so not present yet
	else

		# insert pam_faillock.so preauth & authfail rows with proper value of the 'deny' option
		sed -i --follow-symlink "/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent deny=$var_accounts_passwords_pam_faillock_deny" $pamFile
		sed -i --follow-symlink "/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail deny=$var_accounts_passwords_pam_faillock_deny" $pamFile
		sed -i --follow-symlink "/^account.*required.*pam_unix.so/i account     required      pam_faillock.so" $pamFile
	fi
done

Set Lockout Time For Failed Password Attemptsrule

To configure the system to lock out accounts after a number of incorrect login attempts and require an administrator to unlock the account using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • Add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=3 unlock_time=604800 fail_interval=900
  • Add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=3 unlock_time=604800 fail_interval=900
  • Add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so

Rationale:

Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks. Ensuring that an administrator is involved in unlocking locked accounts draws appropriate attention to such situations.

identifiers:  CCE-27110-6, DISA FSO RHEL-06-000356

references:  AC-7(b), 47

Remediation script:
var_accounts_passwords_pam_faillock_unlock_time="604800"
AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pamFile in "${AUTH_FILES[@]}"
do
	
	# pam_faillock.so already present?
	if grep -q "^auth.*pam_faillock.so.*" $pamFile; then

		# pam_faillock.so present, unlock_time directive present?
		if grep -q "^auth.*[default=die].*pam_faillock.so.*authfail.*unlock_time=" $pamFile; then

			# both pam_faillock.so & unlock_time present, just correct unlock_time directive value
			sed -i --follow-symlink "s/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\(unlock_time *= *\).*/\1\2$var_accounts_passwords_pam_faillock_unlock_time/" $pamFile
			sed -i --follow-symlink "s/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\(unlock_time *= *\).*/\1\2$var_accounts_passwords_pam_faillock_unlock_time/" $pamFile

		# pam_faillock.so present, but unlock_time directive not yet
		else

			# append correct unlock_time value to appropriate places
			sed -i --follow-symlink "/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ unlock_time=$var_accounts_passwords_pam_faillock_unlock_time/" $pamFile
			sed -i --follow-symlink "/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ unlock_time=$var_accounts_passwords_pam_faillock_unlock_time/" $pamFile
		fi

	# pam_faillock.so not present yet
	else

		# insert pam_faillock.so preauth & authfail rows with proper value of the 'unlock_time' option
		sed -i --follow-symlink "/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent unlock_time=$var_accounts_passwords_pam_faillock_unlock_time" $pamFile
		sed -i --follow-symlink "/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail unlock_time=$var_accounts_passwords_pam_faillock_unlock_time" $pamFile
		sed -i --follow-symlink "/^account.*required.*pam_unix.so/i account     required      pam_faillock.so" $pamFile
	fi
done

Set Interval For Counting Failed Password Attemptsrule

Utilizing pam_faillock.so, the fail_interval directive configures the system to lock out accounts after a number of incorrect login attempts. Modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • Add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=3 unlock_time=604800 fail_interval=900
  • Add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=3 unlock_time=604800 fail_interval=900
  • Add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so

Rationale:

Locking out user accounts after a number of incorrect attempts within a specific period of time prevents direct password guessing attacks.

identifiers:  CCE-27215-3, DISA FSO RHEL-06-000357

references:  AC-7(a), 1452

Remediation script:
var_accounts_passwords_pam_faillock_fail_interval="900"
AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pamFile in "${AUTH_FILES[@]}"
do
	
	# pam_faillock.so already present?
	if grep -q "^auth.*pam_faillock.so.*" $pamFile; then

		# pam_faillock.so present, 'fail_interval' directive present?
		if grep -q "^auth.*[default=die].*pam_faillock.so.*authfail.*fail_interval=" $pamFile; then

			# both pam_faillock.so & 'fail_interval' present, just correct 'fail_interval' directive value
			sed -i --follow-symlink "s/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\(fail_interval *= *\).*/\1\2$var_accounts_passwords_pam_faillock_fail_interval/" $pamFile
			sed -i --follow-symlink "s/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\(fail_interval *= *\).*/\1\2$var_accounts_passwords_pam_faillock_fail_interval/" $pamFile

		# pam_faillock.so present, but 'fail_interval' directive not yet
		else

			# append correct 'fail_interval' value to appropriate places
			sed -i --follow-symlink "/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ fail_interval=$var_accounts_passwords_pam_faillock_fail_interval/" $pamFile
			sed -i --follow-symlink "/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ fail_interval=$var_accounts_passwords_pam_faillock_fail_interval/" $pamFile
		fi

	# pam_faillock.so not present yet
	else

		# insert pam_faillock.so preauth & authfail rows with proper value of the 'fail_interval' option
		sed -i --follow-symlink "/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent fail_interval=$var_accounts_passwords_pam_faillock_fail_interval" $pamFile
		sed -i --follow-symlink "/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail fail_interval=$var_accounts_passwords_pam_faillock_fail_interval" $pamFile
		sed -i --follow-symlink "/^account.*required.*pam_unix.so/i account     required      pam_faillock.so" $pamFile
	fi
done

Limit Password Reuserule

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix PAM module. In the file /etc/pam.d/system-auth, append remember=5 to the line which refers to the pam_unix.so module, as shown:

password sufficient pam_unix.so existing_options remember=5
The DoD STIG requirement is 5 passwords.

Rationale:

Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.

identifiers:  CCE-26741-9, DISA FSO RHEL-06-000274

references:  IA-5(f), IA-5(1)(e), 200, Test attestation on 20121024 by DS

Remediation script:
var_password_pam_unix_remember="5"
if grep -q "remember=" /etc/pam.d/system-auth; then   
	sed -i --follow-symlink "s/\(remember *= *\).*/\1$var_password_pam_unix_remember/" /etc/pam.d/system-auth
else
	sed -i --follow-symlink "/^password[[:space:]]\+sufficient[[:space:]]\+pam_unix.so/ s/$/ remember=$var_password_pam_unix_remember/" /etc/pam.d/system-auth
fi

Set Password Hashing Algorithmgroup

The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.

contains 3 rules

Set Password Hashing Algorithm in /etc/pam.d/system-authrule

In /etc/pam.d/system-auth, the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:

password    sufficient    pam_unix.so sha512 other arguments...
This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.

Rationale:

Using a stronger hashing algorithm makes password cracking attacks more difficult.

identifiers:  CCE-26303-8, DISA FSO RHEL-06-000062

references:  IA-5(b), IA-5(c), IA-5(1)(c), IA-7, 803, Test attestation on 20121024 by DS

Remediation script:
if ! grep -q "^password.*sufficient.*pam_unix.so.*sha512" /etc/pam.d/system-auth; then   
	sed -i --follow-symlink "/^password.*sufficient.*pam_unix.so/ s/$/ sha512/" /etc/pam.d/system-auth
fi

Set Password Hashing Algorithm in /etc/login.defsrule

In /etc/login.defs, add or correct the following line to ensure the system will use SHA-512 as the hashing algorithm:

ENCRYPT_METHOD SHA512

Rationale:

Using a stronger hashing algorithm makes password cracking attacks more difficult.

identifiers:  CCE-27228-6, DISA FSO RHEL-06-000063

references:  IA-5(b), IA-5(c), IA-5(1)(c), IA-7, 803, Test attestation on 20121024 by DS

Remediation script:
if grep --silent ^ENCRYPT_METHOD /etc/login.defs ; then
	sed -i 's/^ENCRYPT_METHOD.*/ENCRYPT_METHOD SHA512/g' /etc/login.defs
else
	echo "" >> /etc/login.defs
	echo "ENCRYPT_METHOD SHA512" >> /etc/login.defs
fi

Set Password Hashing Algorithm in /etc/libuser.confrule

In /etc/libuser.conf, add or correct the following line in its [defaults] section to ensure the system will use the SHA-512 algorithm for password hashing:

crypt_style = sha512

Rationale:

Using a stronger hashing algorithm makes password cracking attacks more difficult.

identifiers:  CCE-27229-4, DISA FSO RHEL-06-000064

references:  IA-5(b), IA-5(c), IA-5(1)(c), IA-7, 803, Test attestation on 20121026 by DS

Secure Session Configuration Files for Login Accountsgroup

When a user logs into a Unix account, the system configures the user's session by reading a number of files. Many of these files are located in the user's home directory, and may have weak permissions as a result of user error or misconfiguration. If an attacker can modify or even read certain types of account configuration information, they can often gain full access to the affected user's account. Therefore, it is important to test and correct configuration file permissions for interactive accounts, particularly those of privileged users such as root or system administrators.

contains 5 rules

Ensure that Users Have Sensible Umask Valuesgroup

The umask setting controls the default permissions for the creation of new files. With a default umask setting of 077, files and directories created by users will not be readable by any other user on the system. Users who wish to make specific files group- or world-readable can accomplish this by using the chmod command. Additionally, users can make all their files readable to their group by default by setting a umask of 027 in their shell configuration files. If default per-user groups exist (that is, if every user has a default group whose name is the same as that user's username and whose only member is the user), then it may even be safe for users to select a umask of 007, making it very easy to intentionally share files with groups of which the user is a member.

contains 4 rules

Ensure the Default Bash Umask is Set Correctlyrule

To ensure the default umask for users of the Bash shell is set properly, add or correct the umask setting in /etc/bashrc to read as follows:

umask 077

Rationale:

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

identifiers:  CCE-26917-5, DISA FSO RHEL-06-000342

references:  SA-8, 366, Test attestation on 20140912 by JL

Remediation script:
var_accounts_user_umask="077"
grep -q umask /etc/bashrc && \
  sed -i "s/umask.*/umask $var_accounts_user_umask/g" /etc/bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bashrc
fi

Ensure the Default C Shell Umask is Set Correctlyrule

To ensure the default umask for users of the C shell is set properly, add or correct the umask setting in /etc/csh.cshrc to read as follows:

umask 077

Rationale:

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

identifiers:  CCE-27034-8, DISA FSO RHEL-06-000343

references:  SA-8, 366, Test attestation on 20140912 by JL

Remediation script:
var_accounts_user_umask="077"
grep -q umask /etc/csh.cshrc && \
  sed -i "s/umask.*/umask $var_accounts_user_umask/g" /etc/csh.cshrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/csh.cshrc
fi

Ensure the Default Umask is Set Correctly in /etc/profilerule

To ensure the default umask controlled by /etc/profile is set properly, add or correct the umask setting in /etc/profile to read as follows:

umask 077

Rationale:

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

identifiers:  CCE-26669-2, DISA FSO RHEL-06-000344

references:  SA-8, 366, Test attestation on 20120929 by swells

Remediation script:
var_accounts_user_umask="077"
grep -q umask /etc/profile && \
  sed -i "s/umask.*/umask $var_accounts_user_umask/g" /etc/profile
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/profile
fi

Protect Physical Console Accessgroup

It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some steps which, if taken, make it more difficult for an attacker to quickly or undetectably modify a system from its console.

contains 13 rules

Set Boot Loader Passwordgroup

During the boot process, the boot loader is responsible for starting the execution of the kernel and passing options to it. The boot loader allows for the selection of different kernels - possibly on different partitions or media. The default RHEL boot loader for x86 systems is called GRUB. Options it can pass to the kernel include single-user mode, which provides root access without any authentication, and the ability to disable SELinux. To prevent local users from modifying the boot parameters and endangering security, protect the boot loader configuration with a password and ensure its configuration file's permissions are set properly.

contains 4 rules

Verify /etc/grub.conf User Ownershiprule

The file /etc/grub.conf should be owned by the root user to prevent destruction or modification of the file. To properly set the owner of /etc/grub.conf, run the command:

$ sudo chown root /etc/grub.conf

Rationale:

Only root should be able to modify important boot parameters.

identifiers:  CCE-26995-1, DISA FSO RHEL-06-000065

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, 225, Test attestation on 20121026 by DS

Remediation script:
chown root /etc/grub.conf

Verify /etc/grub.conf Group Ownershiprule

The file /etc/grub.conf should be group-owned by the root group to prevent destruction or modification of the file. To properly set the group owner of /etc/grub.conf, run the command:

$ sudo chgrp root /etc/grub.conf

Rationale:

The root group is a highly-privileged group. Furthermore, the group-owner of this file should not have any access privileges anyway.

identifiers:  CCE-27022-3, DISA FSO RHEL-06-000066

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, 225, Test attestation on 20121026 by DS

Remediation script:
chgrp root /etc/grub.conf

Verify /boot/grub/grub.conf Permissionsrule

File permissions for /boot/grub/grub.conf should be set to 600, which is the default. To properly set the permissions of /boot/grub/grub.conf, run the command:

$ sudo chmod 600 /boot/grub/grub.conf

Rationale:

Proper permissions ensure that only the root user can modify important boot parameters.

identifiers:  CCE-26949-8, DISA FSO RHEL-06-000067

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, 225, Test attestation on 20121026 by DS

Remediation script:
chmod 600 /boot/grub/grub.conf

Set Boot Loader Passwordrule

The grub boot loader should have password protection enabled to protect boot-time settings. To do so, select a password and then generate a hash from it by running the following command:

$ grub-crypt --sha-512
When prompted to enter a password, insert the following line into /etc/grub.conf immediately after the header comments. (Use the output from grub-crypt as the value of password-hash):
password --encrypted password-hash
NOTE: To meet FISMA Moderate, the bootloader password MUST differ from the root password.

Rationale:

Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.

identifiers:  CCE-26911-8, DISA FSO RHEL-06-000068

references:  IA-2(1), IA-5(e) AC-3, 213, Test attestation on 20121026 by DS

Configure Screen Lockinggroup

When a user must temporarily leave an account logged-in, screen locking should be employed to prevent passersby from abusing the account. User education and training is particularly important for screen locking to be effective, and policies can be implemented to reinforce this.

Automatic screen locking is only meant as a safeguard for those cases where a user forgot to lock the screen.

contains 6 rules

Configure GUI Screen Lockinggroup

In the default GNOME desktop, the screen can be locked by choosing Lock Screen from the System menu.

The gconftool-2 program can be used to enforce mandatory screen locking settings for the default GNOME environment. The following sections detail commands to enforce idle activation of the screensaver, screen locking, a blank-screen screensaver, and an idle activation time.

Because users should be trained to lock the screen when they step away from the computer, the automatic locking feature is only meant as a backup. The Lock Screen icon from the System menu can also be dragged to the taskbar in order to facilitate even more convenient screen-locking.

The root account cannot be screen-locked, but this should have no practical effect as the root account should never be used to log into an X Windows environment, and should only be used to for direct login via console in emergency circumstances.

For more information about configuring GNOME screensaver, see http://live.gnome.org/GnomeScreensaver. For more information about enforcing preferences in the GNOME environment using the GConf configuration system, see http://projects.gnome.org/gconf and the man page gconftool-2(1).

contains 4 rules

Set GNOME Login Inactivity Timeoutrule

Run the following command to set the idle time-out value for inactivity in the GNOME desktop to 15 minutes:

$ sudo gconftool-2 \
  --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type int \
  --set /desktop/gnome/session/idle_delay 15

Rationale:

Setting the idle delay controls when the screensaver will start, and can be combined with screen locking to prevent access from passersby.

identifiers:  CCE-26828-4, DISA FSO RHEL-06-000257

references:  AC-11(a), 57

Remediation script:
inactivity_timeout_value="15"
# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Set the idle time-out value for inactivity in the GNOME desktop to meet the
# requirement
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type int \
            --set /desktop/gnome/session/idle_delay ${inactivity_timeout_value}

GNOME Desktop Screensaver Mandatory Userule

Run the following command to activate the screensaver in the GNOME desktop after a period of inactivity:

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type bool \
  --set /apps/gnome-screensaver/idle_activation_enabled true

Rationale:

Enabling idle activation of the screensaver ensures the screensaver will be activated after the idle delay. Applications requiring continuous, real-time screen display (such as network management products) require the login session does not have administrator rights and the display station is located in a controlled-access area.

identifiers:  CCE-26600-7, DISA FSO RHEL-06-000258

references:  AC-11(a), 57

Remediation script:
# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Set the screensaver activation in the GNOME desktop after a period of inactivity
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type bool \
            --set /apps/gnome-screensaver/idle_activation_enabled true

Enable Screen Lock Activation After Idle Periodrule

Run the following command to activate locking of the screensaver in the GNOME desktop when it is activated:

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type bool \
  --set /apps/gnome-screensaver/lock_enabled true

Rationale:

Enabling the activation of the screen lock after an idle period ensures password entry will be required in order to access the system, preventing access by passersby.

identifiers:  CCE-26235-2, DISA FSO RHEL-06-000259

references:  AC-11(a), 57

Remediation script:
# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Set the screensaver locking activation in the GNOME desktop when the
# screensaver is activated
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type bool \
            --set /apps/gnome-screensaver/lock_enabled true

Implement Blank Screensaverrule

Run the following command to set the screensaver mode in the GNOME desktop to a blank screen:

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type string \
  --set /apps/gnome-screensaver/mode blank-only

Rationale:

Setting the screensaver mode to blank-only conceals the contents of the display from passersby.

identifiers:  CCE-26638-7, DISA FSO RHEL-06-000260

references:  AC-11(b), 60

Remediation script:
# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Set the screensaver mode in the GNOME desktop to a blank screen
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type string \
            --set /apps/gnome-screensaver/mode blank-only

Configure Console Screen Lockinggroup

A console screen locking mechanism is provided in the screen package, which is not installed by default.

contains 1 rule

Install the screen Packagerule

To enable console screen locking, install the screen package:

$ sudo yum install screen
Instruct users to begin new terminal sessions with the following command:
$ screen
The console can now be locked with the following key combination:
ctrl+a x

Rationale:

Installing screen ensures a console locking capability is available for users who may need to suspend console logins.

identifiers:  CCE-26940-7, DISA FSO RHEL-06-000071

references:  58, Test attestation on 20121026 by DS

Remediation script:
yum -y install screen
contains 1 rule

Enable Smart Card Loginrule

To enable smart card authentication, consult the documentation at:

  • https://docs.redhat.com/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Managing_Smart_Cards/enabling-smart-card-login.html
For guidance on enabling SSH to authenticate against a Common Access Card (CAC), consult documentation at:
  • https://access.redhat.com/solutions/82273

Rationale:

Smart card login provides two-factor authentication stronger than that provided by a username and password combination. Smart cards leverage PKI (public key infrastructure) in order to provide and verify credentials.

identifiers:  CCE-27440-7, DISA FSO RHEL-06-000349

references:  765, 766, 767, 768, 771, 772, 884

Require Authentication for Single User Moderule

Single-user mode is intended as a system recovery method, providing a single user root access to the system by providing a boot option at startup. By default, no authentication is performed if single-user mode is selected.

To require entry of the root password even if the system is started in single-user mode, add or correct the following line in the file /etc/sysconfig/init:

SINGLE=/sbin/sulogin

Rationale:

This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.

identifiers:  CCE-27040-5, DISA FSO RHEL-06-000069

references:  IA-2(1), AC-3, 213, Test attestation on 20121024 by DS

Remediation script:
grep -q ^SINGLE /etc/sysconfig/init && \
  sed -i "s/SINGLE.*/SINGLE=\/sbin\/sulogin/g" /etc/sysconfig/init
if ! [ $? -eq 0 ]; then
    echo "SINGLE=/sbin/sulogin" >> /etc/sysconfig/init
fi

Disable Ctrl-Alt-Del Reboot Activationrule

By default, the system includes the following line in /etc/init/control-alt-delete.conf to reboot the system when the Ctrl-Alt-Del key sequence is pressed:

exec /sbin/shutdown -r now "Control-Alt-Delete pressed"

To configure the system to log a message instead of rebooting the system, alter that line to read as follows:
exec /usr/bin/logger -p security.info "Control-Alt-Delete pressed"

Rationale:

A locally logged-in user who presses Ctrl-Alt-Del, when at the console, can reboot the system. If accidentally pressed, as could happen in the case of mixed OS environment, this can create the risk of short-term loss of availability of systems due to unintentional reboot. In the GNOME graphical environment, risk of unintentional reboot from the Ctrl-Alt-Del sequence is reduced because the user will be prompted before any action is taken. NOTE: When updating the initscripts package on a Red Hat Enterprise Linux 6 system, custom changes to /etc/init/control-alt-delete.conf may be overwritten. Refer to https://access.redhat.com/site/solutions/70464 for additional information.

identifiers:  CCE-27567-7, DISA FSO RHEL-06-000286

Remediation script:
# If system does not contain control-alt-delete.override,
if [ ! -f /etc/init/control-alt-delete.override ]; then

	# but does have control-alt-delete.conf file,
	if [ -f /etc/init/control-alt-delete.conf ]; then

		# then copy .conf to .override to maintain persistency
		cp /etc/init/control-alt-delete.conf /etc/init/control-alt-delete.override
	fi
fi
 
sed -i 's,^exec.*$,exec /usr/bin/logger -p authpriv.notice -t init "Ctrl-Alt-Del was pressed and ignored",' /etc/init/control-alt-delete.override

Disable Interactive Bootrule

To disable the ability for users to perform interactive startups, edit the file /etc/sysconfig/init. Add or correct the line:

PROMPT=no
The PROMPT option allows the console user to perform an interactive system startup, in which it is possible to select the set of services which are started on boot.

Rationale:

Using interactive boot, the console user could disable auditing, firewalls, or other services, weakening system security.

identifiers:  CCE-27043-9, DISA FSO RHEL-06-000070

references:  SC-2, AC-3, 213, Test attestation on 20121024 by DS

Remediation script:
grep -q ^PROMPT /etc/sysconfig/init && \
  sed -i "s/PROMPT.*/PROMPT=no/g" /etc/sysconfig/init
if ! [ $? -eq 0 ]; then
    echo "PROMPT=no" >> /etc/sysconfig/init
fi

Warning Banners for System Accessesgroup

Each system should expose as little information about itself as possible.

System banners, which are typically displayed just before a login prompt, give out information about the service or the host's operating system. This might include the distribution name and the system kernel version, and the particular version of a network service. This information can assist intruders in gaining access to the system as it can reveal whether the system is running vulnerable software. Most network services can be configured to limit what information is displayed.

Many organizations implement security policies that require a system banner provide notice of the system's ownership, provide warning to unauthorized users, and remind authorized users of their consent to monitoring.

contains 3 rules
contains 2 rules

Enable GUI Warning Bannerrule

To enable displaying a login warning banner in the GNOME Display Manager's login screen, run the following command:

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type bool \
  --set /apps/gdm/simple-greeter/banner_message_enable true
To display a banner, this setting must be enabled and then banner text must also be set.

Rationale:

An appropriate warning message reinforces policy awareness during the login process and facilitates possible legal action against attackers.

identifiers:  CCE-27195-7, DISA FSO RHEL-06-000324

references:  AC-8(a), AC-8(b), AC-8(c), 48, 50

Remediation script:
# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Enable displaying of a login warning banner in the GNOME Display Manager's
# login screen
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type bool \
            --set /apps/gdm/simple-greeter/banner_message_enable true

Modify the System Login Bannerrule

To configure the system login banner:

Edit /etc/issue. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.


OR:

I've read & consent to terms in IS user agreem't.

Rationale:

An appropriate warning message reinforces policy awareness during the login process and facilitates possible legal action against attackers.

identifiers:  CCE-26974-6, DISA FSO RHEL-06-000073

references:  AC-8(a), AC-8(b), AC-8(c), 48, 1384, 1385, 1386, 1387, 1388, Test attestation on 20121026 by DS

Remediation script:
login_banner_text="You[\s\n]+are[\s\n]+accessing[\s\n]+a[\s\n]+U.S.[\s\n]+Government[\s\n]+\(USG\)[\s\n]+Information[\s\n]+System[\s\n]+\(IS\)[\s\n]+that[\s\n]+is[\s\n]+provided[\s\n]+for[\s\n]+USG-authorized[\s\n]+use[\s\n]+only.[\s\n]*By[\s\n]+using[\s\n]+this[\s\n]+IS[\s\n]+\(which[\s\n]+includes[\s\n]+any[\s\n]+device[\s\n]+attached[\s\n]+to[\s\n]+this[\s\n]+IS\),[\s\n]+you[\s\n]+consent[\s\n]+to[\s\n]+the[\s\n]+following[\s\n]+conditions\:[\s\n]*-[\s\n]*The[\s\n]+USG[\s\n]+routinely[\s\n]+intercepts[\s\n]+and[\s\n]+monitors[\s\n]+communications[\s\n]+on[\s\n]+this[\s\n]+IS[\s\n]+for[\s\n]+purposes[\s\n]+including,[\s\n]+but[\s\n]+not[\s\n]+limited[\s\n]+to,[\s\n]+penetration[\s\n]+testing,[\s\n]+COMSEC[\s\n]+monitoring,[\s\n]+network[\s\n]+operations[\s\n]+and[\s\n]+defense,[\s\n]+personnel[\s\n]+misconduct[\s\n]+\(PM\),[\s\n]+law[\s\n]+enforcement[\s\n]+\(LE\),[\s\n]+and[\s\n]+counterintelligence[\s\n]+\(CI\)[\s\n]+investigations.[\s\n]*-[\s\n]*At[\s\n]+any[\s\n]+time,[\s\n]+the[\s\n]+USG[\s\n]+may[\s\n]+inspect[\s\n]+and[\s\n]+seize[\s\n]+data[\s\n]+stored[\s\n]+on[\s\n]+this[\s\n]+IS.[\s\n]*-[\s\n]*Communications[\s\n]+using,[\s\n]+or[\s\n]+data[\s\n]+stored[\s\n]+on,[\s\n]+this[\s\n]+IS[\s\n]+are[\s\n]+not[\s\n]+private,[\s\n]+are[\s\n]+subject[\s\n]+to[\s\n]+routine[\s\n]+monitoring,[\s\n]+interception,[\s\n]+and[\s\n]+search,[\s\n]+and[\s\n]+may[\s\n]+be[\s\n]+disclosed[\s\n]+or[\s\n]+used[\s\n]+for[\s\n]+any[\s\n]+USG-authorized[\s\n]+purpose.[\s\n]*-[\s\n]*This[\s\n]+IS[\s\n]+includes[\s\n]+security[\s\n]+measures[\s\n]+\(e.g.,[\s\n]+authentication[\s\n]+and[\s\n]+access[\s\n]+controls\)[\s\n]+to[\s\n]+protect[\s\n]+USG[\s\n]+interests[\s\n]+--[\s\n]+not[\s\n]+for[\s\n]+your[\s\n]+personal[\s\n]+benefit[\s\n]+or[\s\n]+privacy.[\s\n]*-[\s\n]*Notwithstanding[\s\n]+the[\s\n]+above,[\s\n]+using[\s\n]+this[\s\n]+IS[\s\n]+does[\s\n]+not[\s\n]+constitute[\s\n]+consent[\s\n]+to[\s\n]+PM,[\s\n]+LE[\s\n]+or[\s\n]+CI[\s\n]+investigative[\s\n]+searching[\s\n]+or[\s\n]+monitoring[\s\n]+of[\s\n]+the[\s\n]+content[\s\n]+of[\s\n]+privileged[\s\n]+communications,[\s\n]+or[\s\n]+work[\s\n]+product,[\s\n]+related[\s\n]+to[\s\n]+personal[\s\n]+representation[\s\n]+or[\s\n]+services[\s\n]+by[\s\n]+attorneys,[\s\n]+psychotherapists,[\s\n]+or[\s\n]+clergy,[\s\n]+and[\s\n]+their[\s\n]+assistants.[\s\n]+Such[\s\n]+communications[\s\n]+and[\s\n]+work[\s\n]+product[\s\n]+are[\s\n]+private[\s\n]+and[\s\n]+confidential.[\s\n]+See[\s\n]+User[\s\n]+Agreement[\s\n]+for[\s\n]+details."
# There was a regular-expression matching various banners, needs to be expanded
expanded=$(echo "$login_banner_text" | sed 's/\[\\s\\n\][+*]/ /g;s/\\//g;s/[^-]- /\n\n-/g')
formatted=$(echo "$expanded" | fold -sw 80)

cat <<EOF >/etc/issue
$formatted
EOF

printf "\n" >> /etc/issue

Network Configuration and Firewallsgroup

Most machines must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking which must be made when configuring a system.

This section also discusses firewalls, network access controls, and other network security frameworks, which allow system-level rules to be written that can limit an attackers' ability to connect to your system. These rules can specify that network traffic should be allowed or denied from certain IP addresses, hosts, and networks. The rules can also specify which of the system's network services are available to particular hosts or networks.

contains 29 rules

Kernel Parameters Which Affect Networkinggroup

The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.

contains 15 rules

Network Parameters for Hosts Onlygroup

If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.

contains 3 rules

Disable Kernel Parameter for Sending ICMP Redirects by Defaultrule

To set the runtime status of the net.ipv4.conf.default.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.default.send_redirects = 0

Rationale:

Sending ICMP redirects permits the system to instruct other systems to update their routing information. The ability to send ICMP redirects is only appropriate for systems acting as routers.

identifiers:  CCE-27001-7, DISA FSO RHEL-06-000080

references:  AC-4, CM-7, SC-5, SC-7, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.default.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects=0

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.default.send_redirects /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.default.send_redirects.*/net.ipv4.conf.default.send_redirects = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.default.send_redirects to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.default.send_redirects = 0" >> /etc/sysctl.conf
fi

Disable Kernel Parameter for Sending ICMP Redirects for All Interfacesrule

To set the runtime status of the net.ipv4.conf.all.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.all.send_redirects = 0

Rationale:

Sending ICMP redirects permits the system to instruct other systems to update their routing information. The ability to send ICMP redirects is only appropriate for systems acting as routers.

identifiers:  CCE-27004-1, DISA FSO RHEL-06-000081

references:  CM-7, SC-5(1), 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects=0

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.all.send_redirects /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.all.send_redirects.*/net.ipv4.conf.all.send_redirects = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.all.send_redirects to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.all.send_redirects = 0" >> /etc/sysctl.conf
fi

Disable Kernel Parameter for IP Forwardingrule

To set the runtime status of the net.ipv4.ip_forward kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.ip_forward=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.ip_forward = 0

Rationale:

IP forwarding permits the kernel to forward packets from one network interface to another. The ability to forward packets between two networks is only appropriate for systems acting as routers.

identifiers:  CCE-26866-4, DISA FSO RHEL-06-000082

references:  CM-7, SC-5, 366, Test attestation on 20121024 by DS

Network Related Kernel Runtime Parameters for Hosts and Routersgroup

Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.

contains 12 rules

Disable Kernel Parameter for Accepting Source-Routed Packets for All Interfacesrule

To set the runtime status of the net.ipv4.conf.all.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.all.accept_source_route = 0

Rationale:

Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

identifiers:  CCE-27037-1, DISA FSO RHEL-06-000083

references:  CM-7, SC-5, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route=0

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.accept_source_route = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.all.accept_source_route /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.all.accept_source_route.*/net.ipv4.conf.all.accept_source_route = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.all.accept_source_route to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.all.accept_source_route = 0" >> /etc/sysctl.conf
fi

Disable Kernel Parameter for Accepting ICMP Redirects for All Interfacesrule

To set the runtime status of the net.ipv4.conf.all.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.all.accept_redirects = 0

Rationale:

Accepting ICMP redirects has few legitimate uses. It should be disabled unless it is absolutely required.

identifiers:  CCE-27027-2, DISA FSO RHEL-06-000084

references:  CM-7, SC-5, 1503, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects=0

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.accept_redirects = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.all.accept_redirects /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.all.accept_redirects.*/net.ipv4.conf.all.accept_redirects = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.all.accept_redirects to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.all.accept_redirects = 0" >> /etc/sysctl.conf
fi

Disable Kernel Parameter for Accepting Secure Redirects for All Interfacesrule

To set the runtime status of the net.ipv4.conf.all.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.all.secure_redirects = 0

Rationale:

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

identifiers:  CCE-26854-0, DISA FSO RHEL-06-000086

references:  AC-4, CM-7, SC-5, 1503, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects=0

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.secure_redirects = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.all.secure_redirects /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.all.secure_redirects.*/net.ipv4.conf.all.secure_redirects = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.all.secure_redirects to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.all.secure_redirects = 0" >> /etc/sysctl.conf
fi

Enable Kernel Parameter to Log Martian Packetsrule

To set the runtime status of the net.ipv4.conf.all.log_martians kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.log_martians=1
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.all.log_martians = 1

Rationale:

The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

identifiers:  CCE-27066-0, DISA FSO RHEL-06-000088

references:  AC-3(10), CM-7, SC-5(3), 126, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians=1

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to "1"
#	else, add "net.ipv4.conf.all.log_martians = 1" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.all.log_martians /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.all.log_martians.*/net.ipv4.conf.all.log_martians = 1/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.all.log_martians to 1 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.all.log_martians = 1" >> /etc/sysctl.conf
fi

Disable Kernel Parameter for Accepting Source-Routed Packets By Defaultrule

To set the runtime status of the net.ipv4.conf.default.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.default.accept_source_route = 0

Rationale:

Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

identifiers:  CCE-26983-7, DISA FSO RHEL-06-000089

references:  AC-4, CM-7, SC-5, SC-7, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route=0

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.accept_source_route = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.default.accept_source_route /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.default.accept_source_route.*/net.ipv4.conf.default.accept_source_route = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.default.accept_source_route to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.default.accept_source_route = 0" >> /etc/sysctl.conf
fi

Disable Kernel Parameter for Accepting ICMP Redirects By Defaultrule

To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.default.accept_redirects = 0

Rationale:

This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

identifiers:  CCE-27015-7, DISA FSO RHEL-06-000091

references:  AC-4, CM-7, SC-5, SC-7, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects=0

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.accept_redirects = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.default.accept_redirects /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.default.accept_redirects.*/net.ipv4.conf.default.accept_redirects = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.default.accept_redirects to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.default.accept_redirects = 0" >> /etc/sysctl.conf
fi

Disable Kernel Parameter for Accepting Secure Redirects By Defaultrule

To set the runtime status of the net.ipv4.conf.default.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.default.secure_redirects = 0

Rationale:

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

identifiers:  CCE-26831-8, DISA FSO RHEL-06-000090

references:  AC-4, CM-7, SC-5, SC-7, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects=0

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.secure_redirects = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.default.secure_redirects /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.default.secure_redirects.*/net.ipv4.conf.default.secure_redirects = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.default.secure_redirects to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.default.secure_redirects = 0" >> /etc/sysctl.conf
fi

Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requestsrule

To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.icmp_echo_ignore_broadcasts = 1

Rationale:

Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.

identifiers:  CCE-26883-9, DISA FSO RHEL-06-000092

references:  CM-7, SC-5, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts=1

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to "1"
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = 1" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.icmp_echo_ignore_broadcasts /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.icmp_echo_ignore_broadcasts.*/net.ipv4.icmp_echo_ignore_broadcasts = 1/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.icmp_echo_ignore_broadcasts to 1 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.icmp_echo_ignore_broadcasts = 1" >> /etc/sysctl.conf
fi

Enable Kernel Parameter to Ignore Bogus ICMP Error Responsesrule

To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.icmp_ignore_bogus_error_responses = 1

Rationale:

Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.

identifiers:  CCE-26993-6, DISA FSO RHEL-06-000093

references:  CM-7, SC-5, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses=1

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to "1"
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = 1" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.icmp_ignore_bogus_error_responses /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.icmp_ignore_bogus_error_responses.*/net.ipv4.icmp_ignore_bogus_error_responses = 1/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.icmp_ignore_bogus_error_responses to 1 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.icmp_ignore_bogus_error_responses = 1" >> /etc/sysctl.conf
fi

Enable Kernel Parameter to Use TCP Syncookiesrule

To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.tcp_syncookies=1
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.tcp_syncookies = 1

Rationale:

A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.

identifiers:  CCE-27053-8, DISA FSO RHEL-06-000095

references:  AC-4, SC-5(2), SC-5(3), 1092, 1095, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies=1

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to "1"
#	else, add "net.ipv4.tcp_syncookies = 1" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.tcp_syncookies /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.tcp_syncookies.*/net.ipv4.tcp_syncookies = 1/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.tcp_syncookies to 1 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.tcp_syncookies = 1" >> /etc/sysctl.conf
fi

Enable Kernel Parameter to Use Reverse Path Filtering for All Interfacesrule

To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.all.rp_filter = 1

Rationale:

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

identifiers:  CCE-26979-5, DISA FSO RHEL-06-000096

references:  AC-4, SC-5, SC-7, 1551, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter=1

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to "1"
#	else, add "net.ipv4.conf.all.rp_filter = 1" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.all.rp_filter /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.all.rp_filter.*/net.ipv4.conf.all.rp_filter = 1/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.all.rp_filter to 1 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.all.rp_filter = 1" >> /etc/sysctl.conf
fi

Enable Kernel Parameter to Use Reverse Path Filtering by Defaultrule

To set the runtime status of the net.ipv4.conf.default.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv4.conf.default.rp_filter = 1

Rationale:

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

identifiers:  CCE-26915-9, DISA FSO RHEL-06-000097

references:  AC-4, SC-5, SC-7, Test attestation on 20121024 by DS

Remediation script:
#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter=1

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to "1"
#	else, add "net.ipv4.conf.default.rp_filter = 1" to /etc/sysctl.conf
#
if grep --silent ^net.ipv4.conf.default.rp_filter /etc/sysctl.conf ; then
	sed -i 's/^net.ipv4.conf.default.rp_filter.*/net.ipv4.conf.default.rp_filter = 1/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv4.conf.default.rp_filter to 1 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv4.conf.default.rp_filter = 1" >> /etc/sysctl.conf
fi

Wireless Networkinggroup

Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be included in laptop or portable systems than in desktops or servers.

Removal of hardware provides the greatest assurance that the wireless capability remains disabled. Acquisition policies often include provisions to prevent the purchase of equipment that will be used in sensitive spaces and includes wireless capabilities. If it is impractical to remove the wireless hardware, and policy permits the device to enter sensitive spaces as long as wireless is disabled, efforts should instead focus on disabling wireless capability via software.

contains 2 rules

Disable Wireless Through Software Configurationgroup

If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following methods can disable software support for wireless networking, but note that these methods do not prevent malicious software or careless users from re-activating the devices.

contains 2 rules

Disable Bluetooth Servicerule

The bluetooth service can be disabled with the following command:

$ sudo chkconfig bluetooth off
$ sudo service bluetooth stop

Rationale:

Disabling the bluetooth service prevents the system from attempting connections to Bluetooth devices, which entails some security risk. Nevertheless, variation in this risk decision may be expected due to the utility of Bluetooth connectivity and its limited range.

identifiers:  CCE-27081-9, DISA FSO RHEL-06-000331

references:  AC-18(a), AC-18(d), AC-18(3), CM-7, 85, 1551, Test attestation on 20121025 by DS

Remediation script:
#
# Disable bluetooth for all run levels
#
/sbin/chkconfig --level 0123456 bluetooth off

#
# Stop bluetooth if currently running
#
/sbin/service bluetooth stop

Disable Bluetooth Kernel Modulesrule

The kernel's module loading system can be configured to prevent loading of the Bluetooth module. Add the following to the appropriate /etc/modprobe.d configuration file to prevent the loading of the Bluetooth module:

install bluetooth /bin/true

Rationale:

If Bluetooth functionality must be disabled, preventing the kernel from loading the kernel module provides an additional safeguard against its activation.

identifiers:  CCE-26763-3, DISA FSO RHEL-06-000315

references:  AC-18(a), AC-18(d), AC-18(3), CM-7, 85, 1551, Test attestation on 20141031 by JL

Remediation script:
echo "install bluetooth /bin/true" > /etc/modprobe.d/bluetooth.conf

IPv6group

The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important feature is its support for automatic configuration of many network settings.

contains 2 rules

Disable Support for IPv6 Unless Neededgroup

Despite configuration that suggests support for IPv6 has been disabled, link-local IPv6 address auto-configuration occurs even when only an IPv4 address is assigned. The only way to effectively prevent execution of the IPv6 networking stack is to instruct the system not to activate the IPv6 kernel module.

contains 1 rule

Disable IPv6 Networking Support Automatic Loadingrule

To prevent the IPv6 kernel module (ipv6) from binding to the IPv6 networking stack, add the following line to /etc/modprobe.d/disabled.conf (or another file in /etc/modprobe.d):

options ipv6 disable=1
This permits the IPv6 module to be loaded (and thus satisfy other modules that depend on it), while disabling support for the IPv6 protocol.

Rationale:

Any unnecessary network stacks - including IPv6 - should be disabled, to reduce the vulnerability to exploitation.

identifiers:  CCE-27153-6, DISA FSO RHEL-06-000098

references:  CM-7, 1551, Test attestation on 20121024 by DS

Remediation script:

# Prevent the IPv6 kernel module (ipv6) from loading the IPv6 networking stack
echo "options ipv6 disable=1" > /etc/modprobe.d/ipv6.conf

# Since according to: https://access.redhat.com/solutions/72733
# "ipv6 disable=1" options doesn't always disable the IPv6 networking stack from
# loading, instruct also sysctl configuration to disable IPv6 according to:
# https://access.redhat.com/solutions/8709#rhel6disable

declare -a IPV6_SETTINGS=("net.ipv6.conf.all.disable_ipv6" "net.ipv6.conf.default.disable_ipv6")

for setting in ${IPV6_SETTINGS[@]}
do
	# Set runtime =1 for setting
	/sbin/sysctl -q -n -w "$setting=1"

	# If setting is present in /etc/sysctl.conf, change value to "1"
	# else, add "$setting = 1" to /etc/sysctl.conf
	if grep -q ^"$setting" /etc/sysctl.conf ; then
		sed -i "s/^$setting.*/$setting = 1/g" /etc/sysctl.conf
	else
		echo "" >> /etc/sysctl.conf
		echo "# Set $setting = 1 per security requirements" >> /etc/sysctl.conf
		echo "$setting = 1" >> /etc/sysctl.conf
	fi
done

Configure IPv6 Settings if Necessarygroup

A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually configuring important configuration information is preferable to accepting it from the network in an unauthenticated fashion.

contains 1 rule

Disable Automatic Configurationgroup

Disable the system's acceptance of router advertisements and redirects by adding or correcting the following line in /etc/sysconfig/network (note that this does not disable sending router solicitations):

IPV6_AUTOCONF=no

contains 1 rule

Disable Accepting IPv6 Redirectsrule

To set the runtime status of the net.ipv6.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0
If this is not the system's default value, add the following line to /etc/sysctl.conf:
net.ipv6.conf.default.accept_redirects = 0

Rationale:

An illicit ICMP redirect message could result in a man-in-the-middle attack.

identifiers:  CCE-27166-8, DISA FSO RHEL-06-000099

references:  CM-7, 1551

Remediation script:
#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects=0

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv6.conf.default.accept_redirects = 0" to /etc/sysctl.conf
#
if grep --silent ^net.ipv6.conf.default.accept_redirects /etc/sysctl.conf ; then
	sed -i 's/^net.ipv6.conf.default.accept_redirects.*/net.ipv6.conf.default.accept_redirects = 0/g' /etc/sysctl.conf
else
	echo -e "\n# Set net.ipv6.conf.default.accept_redirects to 0 per security requirements" >> /etc/sysctl.conf
	echo "net.ipv6.conf.default.accept_redirects = 0" >> /etc/sysctl.conf
fi

iptables and ip6tablesgroup

A host-based firewall called netfilter is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program iptables, and the entire capability is frequently referred to by this name. An analogous program called ip6tables handles filtering for IPv6.

Unlike TCP Wrappers, which depends on the network server program to support and respect the rules written, netfilter filtering occurs at the kernel level, before a program can even process the data from the network packet. As such, any program on the system is affected by the rules written.

This section provides basic information about strengthening the iptables and ip6tables configurations included with the system. For more complete information that may allow the construction of a sophisticated ruleset tailored to your environment, please consult the references at the end of this section.

contains 5 rules

Inspect and Activate Default Rulesgroup

View the currently-enforced iptables rules by running the command:

$ sudo iptables -nL --line-numbers
The command is analogous for ip6tables.

If the firewall does not appear to be active (i.e., no rules appear), activate it and ensure that it starts at boot by issuing the following commands (and analogously for ip6tables):
$ sudo service iptables restart
The default iptables rules are:
Chain INPUT (policy ACCEPT)
num  target     prot opt source       destination
1    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0    state RELATED,ESTABLISHED 
2    ACCEPT     icmp --  0.0.0.0/0    0.0.0.0/0
3    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0
4    ACCEPT     tcp  --  0.0.0.0/0    0.0.0.0/0    state NEW tcp dpt:22 
5    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain FORWARD (policy ACCEPT)
num  target     prot opt source       destination
1    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source       destination
The ip6tables default rules are essentially the same.

contains 3 rules

Verify ip6tables Enabled if Using IPv6rule

The ip6tables service can be enabled with the following command:

$ sudo chkconfig --level 2345 ip6tables on

Rationale:

The ip6tables service provides the system's host-based firewalling capability for IPv6 and ICMPv6.

identifiers:  CCE-27006-6, DISA FSO RHEL-06-000103

references:  AC-4, CA-3(c), CM-7, 32, 66, 1115, 1118, 1092, 1117, 1098, 1100, 1097, 1414, Test attestation on 20121024 by DS

Remediation script:
#
# Enable ip6tables for all run levels
#
/sbin/chkconfig --level 0123456 ip6tables on

#
# Start ip6tables if not currently running
#
/sbin/service ip6tables start

Set Default ip6tables Policy for Incoming Packetsrule

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/ip6tables:

:INPUT DROP [0:0]
If changes were required, reload the ip6tables rules:
$ sudo service ip6tables reload

Rationale:

In ip6tables, the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

identifiers:  CCE-27317-7, DISA FSO RHEL-06-000523

references:  CM-7, 66, 1109, 1154, 1414

Remediation script:
sed -i 's/^:INPUT ACCEPT.*/:INPUT DROP [0:0]/g' /etc/sysconfig/ip6tables

Verify iptables Enabledrule

The iptables service can be enabled with the following command:

$ sudo chkconfig --level 2345 iptables on

Rationale:

The iptables service provides the system's host-based firewalling capability for IPv4 and ICMP.

identifiers:  CCE-27018-1, DISA FSO RHEL-06-000117

references:  AC-4, CA-3(c), CM-7, 32, 66, 1115, 1118, 1092, 1117, 1098, 1100, 1097, 1414, Test attestation on 20121024 by DS

Remediation script:
#
# Enable iptables for all run levels
#
/sbin/chkconfig --level 0123456 iptables on

#
# Start iptables if not currently running
#
/sbin/service iptables start

Strengthen the Default Rulesetgroup

The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files iptables and ip6tables in the directory /etc/sysconfig. Many of the lines in these files are similar to the command line arguments that would be provided to the programs /sbin/iptables or /sbin/ip6tables - but some are quite different.

The following recommendations describe how to strengthen the default ruleset configuration file. An alternative to editing this configuration file is to create a shell script that makes calls to the iptables program to load in rules, and then invokes service iptables save to write those loaded rules to /etc/sysconfig/iptables.

The following alterations can be made directly to /etc/sysconfig/iptables and /etc/sysconfig/ip6tables. Instructions apply to both unless otherwise noted. Language and address conventions for regular iptables are used throughout this section; configuration for ip6tables will be either analogous or explicitly covered.

warning  The program system-config-securitylevel allows additional services to penetrate the default firewall rules and automatically adjusts /etc/sysconfig/iptables. This program is only useful if the default ruleset meets your security requirements. Otherwise, this program should not be used to make changes to the firewall configuration because it re-writes the saved configuration file.
contains 2 rules

Set Default iptables Policy for Incoming Packetsrule

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/iptables:

:INPUT DROP [0:0]

Rationale:

In iptables the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

identifiers:  CCE-26444-0, DISA FSO RHEL-06-000120

references:  CM-7, 66, 1109, 1154, 1414

Remediation script:
sed -i 's/^:INPUT ACCEPT.*/:INPUT DROP [0:0]/g' /etc/sysconfig/iptables

Set Default iptables Policy for Forwarded Packetsrule

To set the default policy to DROP (instead of ACCEPT) for the built-in FORWARD chain which processes packets that will be forwarded from one interface to another, add or correct the following line in /etc/sysconfig/iptables:

:FORWARD DROP [0:0]

Rationale:

In iptables, the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

identifiers:  CCE-27186-6, DISA FSO RHEL-06-000320

references:  CM-7, 1109

Remediation script:
sed -i 's/^:FORWARD ACCEPT.*/:FORWARD DROP [0:0]/g' /etc/sysconfig/iptables

Uncommon Network Protocolsgroup

The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code are not frequently discovered, the consequences can be dramatic. Ensuring uncommon network protocols are disabled reduces the system's risk to attacks targeted at its implementation of those protocols.

warning  Although these protocols are not commonly used, avoid disruption in your network environment by ensuring they are not needed prior to disabling them.
contains 4 rules

Disable DCCP Supportrule

The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. To configure the system to prevent the dccp kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install dccp /bin/true

Rationale:

Disabling DCCP protects the system against exploitation of any flaws in its implementation.

identifiers:  CCE-26448-1, DISA FSO RHEL-06-000124

references:  CM-7, 382, Test attestation on 20121024 by DS

Remediation script:
echo "install dccp /bin/true" > /etc/modprobe.d/dccp.conf

Disable SCTP Supportrule

The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with several streams of messages within one connection. To configure the system to prevent the sctp kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install sctp /bin/true

Rationale:

Disabling SCTP protects the system against exploitation of any flaws in its implementation.

identifiers:  CCE-26410-1, DISA FSO RHEL-06-000125

references:  CM-7, 382, Test attestation on 20121024 by DS

Remediation script:
echo "install sctp /bin/true" > /etc/modprobe.d/sctp.conf

Disable RDS Supportrule

The Reliable Datagram Sockets (RDS) protocol is a transport layer protocol designed to provide reliable high- bandwidth, low-latency communications between nodes in a cluster. To configure the system to prevent the rds kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install rds /bin/true

Rationale:

Disabling RDS protects the system against exploitation of any flaws in its implementation.

identifiers:  CCE-26239-4, DISA FSO RHEL-06-000126

references:  CM-7, 382, Test attestation on 20121024 by DS

Remediation script:
echo "install rds /bin/true" > /etc/modprobe.d/rds.conf

Disable TIPC Supportrule

The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the system to prevent the tipc kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install tipc /bin/true

Rationale:

Disabling TIPC protects the system against exploitation of any flaws in its implementation.

identifiers:  CCE-26696-5, DISA FSO RHEL-06-000127

references:  CM-7, 382, Test attestation on 20121024 by DS

Remediation script:
echo "install tipc /bin/true" > /etc/modprobe.d/tipc.conf

IPSec Supportgroup

Support for Internet Protocol Security (IPsec) is provided in RHEL 6 with Openswan.

contains 1 rule

Install openswan Packagerule

The Openswan package provides an implementation of IPsec and IKE, which permits the creation of secure tunnels over untrusted networks. The openswan package can be installed with the following command:

$ sudo yum install openswan

Rationale:

Providing the ability for remote users or systems to initiate a secure VPN connection protects information when it is transmitted over a wide area network.

identifiers:  CCE-27626-1, DISA FSO RHEL-06-000321

references:  AC-17, MA-4, SC-8, 1130, 1131

Remediation script:
yum -y install openswan

Configure Sysloggroup

The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lack of authentication, encryption, or reliable transport for messages sent over a network. However, due to its long history, syslog is a de facto standard which is supported by almost all Unix applications.

In RHEL 6, rsyslog has replaced ksyslogd as the syslog daemon of choice, and it includes some additional security features such as reliable, connection-oriented (i.e. TCP) transmission of logs, the option to log to database formats, and the encryption of log data en route to a central logging server. This section discusses how to configure rsyslog for best effect, and how to use tools provided with the system to maintain and monitor logs.

contains 7 rules

Ensure Proper Configuration of Log Filesgroup

The file /etc/rsyslog.conf controls where log message are written. These are controlled by lines called rules, which consist of a selector and an action. These rules are often customized depending on the role of the system, the requirements of the environment, and whatever may enable the administrator to most effectively make use of log data. The default rules in RHEL 6 are:

*.info;mail.none;authpriv.none;cron.none                /var/log/messages
authpriv.*                                              /var/log/secure
mail.*                                                  -/var/log/maillog
cron.*                                                  /var/log/cron
*.emerg                                                 *
uucp,news.crit                                          /var/log/spooler
local7.*                                                /var/log/boot.log
See the man page rsyslog.conf(5) for more information. Note that the rsyslog daemon can be configured to use a timestamp format that some log processing programs may not understand. If this occurs, edit the file /etc/rsyslog.conf and add or edit the following line:
$ ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat

contains 3 rules

Ensure Log Files Are Owned By Appropriate Userrule

The owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's owner:

$ ls -l LOGFILE
If the owner is not root, run the following command to correct this:
$ sudo chown root LOGFILE

Rationale:

The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.

identifiers:  CCE-26812-8, DISA FSO RHEL-06-000133

references:  AC-6, 1314, Test attestation on 20121024 by DS

Ensure Log Files Are Owned By Appropriate Grouprule

The group-owner of all log files written by rsyslog should be root. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's group owner:

$ ls -l LOGFILE
If the owner is not root, run the following command to correct this:
$ sudo chgrp root LOGFILE

Rationale:

The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.

identifiers:  CCE-26821-9, DISA FSO RHEL-06-000134

references:  AC-6, 1314, Test attestation on 20121024 by DS

Ensure System Log Files Have Correct Permissionsrule

The file permissions for all log files written by rsyslog should be set to 600, or more restrictive. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's permissions:

$ ls -l LOGFILE
If the permissions are not 600 or more restrictive, run the following command to correct this:
$ sudo chmod 0600 LOGFILE

Rationale:

Log files can contain valuable information regarding system configuration. If the system log files are not protected unauthorized users could change the logged data, eliminating their forensic value.

identifiers:  CCE-27190-8, DISA FSO RHEL-06-000135

references:  http://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-53r4.pdf, 1314, Test attestation on 20121024 by DS

Rsyslog Logs Sent To Remote Hostgroup

If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised the root account on a machine may delete the log entries which indicate that the system was attacked before they are seen by an administrator.

However, it is recommended that logs be stored on the local host in addition to being sent to the loghost, especially if rsyslog has been configured to use the UDP protocol to send messages over a network. UDP does not guarantee reliable delivery, and moderately busy sites will lose log messages occasionally, especially in periods of high traffic which may be the result of an attack. In addition, remote rsyslog messages are not authenticated in any way by default, so it is easy for an attacker to introduce spurious messages to the central log server. Also, some problems cause loss of network connectivity, which will prevent the sending of messages to the central server. For all of these reasons, it is better to store log messages both centrally and on each host, so that they can be correlated if necessary.

contains 1 rule

Ensure Logs Sent To Remote Hostrule

To configure rsyslog to send logs to a remote log server, open /etc/rsyslog.conf and read and understand the last section of the file, which describes the multiple directives necessary to activate remote logging. Along with these other directives, the system can be configured to forward its logs to a particular log server by adding or correcting one of the following lines, substituting loghost.example.com appropriately. The choice of protocol depends on the environment of the system; although TCP and RELP provide more reliable message delivery, they may not be supported in all environments.
To use UDP for log message delivery:

*.* @loghost.example.com

To use TCP for log message delivery:
*.* @@loghost.example.com

To use RELP for log message delivery:
*.* :omrelp:loghost.example.com

Rationale:

A log server (loghost) receives syslog messages from one or more systems. This data can be used as an additional log source in the event a system is compromised and its local logs are suspect. Forwarding log messages to a remote loghost also provides system administrators with a centralized place to view the status of multiple hosts within the enterprise.

identifiers:  CCE-26801-1, DISA FSO RHEL-06-000136

references:  AU-3(2), AU-9, 1348, 136

Ensure All Logs are Rotated by logrotategroup

Edit the file /etc/logrotate.d/syslog. Find the first line, which should look like this (wrapped for clarity):

/var/log/messages /var/log/secure /var/log/maillog /var/log/spooler \
  /var/log/boot.log /var/log/cron {
Edit this line so that it contains a one-space-separated listing of each log file referenced in /etc/rsyslog.conf.

All logs in use on a system must be rotated regularly, or the log files will consume disk space over time, eventually interfering with system operation. The file /etc/logrotate.d/syslog is the configuration file used by the logrotate program to maintain all log files written by syslog. By default, it rotates logs weekly and stores four archival copies of each log. These settings can be modified by editing /etc/logrotate.conf, but the defaults are sufficient for purposes of this guide.

Note that logrotate is run nightly by the cron job /etc/cron.daily/logrotate. If particularly active logs need to be rotated more often than once a day, some other mechanism must be used.

contains 1 rule

Ensure Logrotate Runs Periodicallyrule

The logrotate utility allows for the automatic rotation of log files. The frequency of rotation is specified in /etc/logrotate.conf, which triggers a cron task. To configure logrotate to run daily, add or correct the following line in /etc/logrotate.conf:

# rotate log files frequency
daily

Rationale:

Log files that are not properly rotated run the risk of growing so large that they fill up the /var/log partition. Valuable logging information could be lost if the /var/log partition becomes full.

identifiers:  CCE-27014-0, DISA FSO RHEL-06-000138

references:  AU-9, 366

Ensure rsyslog is Installedrule

Rsyslog is installed by default. The rsyslog package can be installed with the following command:

$ sudo yum install rsyslog

Rationale:

The rsyslog package provides the rsyslog daemon, which provides system logging services.

identifiers:  CCE-26809-4

references:  AU-9(2), 1311, 1312, Test attestation on 20121024 by DS

Remediation script:
yum -y install rsyslog

Enable rsyslog Servicerule

The rsyslog service provides syslog-style logging by default on RHEL 6. The rsyslog service can be enabled with the following command:

$ sudo chkconfig --level 2345 rsyslog on

Rationale:

The rsyslog service must be running in order to provide logging services, which are essential to system administration.

identifiers:  CCE-26807-8

references:  AU-12, 1557, 1312, 1311, Test attestation on 20121024 by DS

Remediation script:
#
# Enable rsyslog for all run levels
#
/sbin/chkconfig --level 0123456 rsyslog on

#
# Start rsyslog if not currently running
#
/sbin/service rsyslog start

System Accounting with auditdgroup

The audit service provides substantial capabilities for recording system activities. By default, the service audits about SELinux AVC denials and certain types of security-relevant events such as system logins, account modifications, and authentication events performed by programs such as sudo. Under its default configuration, auditd has modest disk space requirements, and should not noticeably impact system performance.

Government networks often have substantial auditing requirements and auditd can be configured to meet these requirements. Examining some example audit records demonstrates how the Linux audit system satisfies common requirements. The following example from Fedora Documentation available at http://docs.fedoraproject.org/en-US/Fedora/13/html/Security-Enhanced_Linux/sect-Security-Enhanced_Linux-Fixing_Problems-Raw_Audit_Messages.html shows the substantial amount of information captured in a two typical "raw" audit messages, followed by a breakdown of the most important fields. In this example the message is SELinux-related and reports an AVC denial (and the associated system call) that occurred when the Apache HTTP Server attempted to access the /var/www/html/file1 file (labeled with the samba_share_t type):

type=AVC msg=audit(1226874073.147:96): avc:  denied  { getattr } for pid=2465 comm="httpd"
path="/var/www/html/file1" dev=dm-0 ino=284133 scontext=unconfined_u:system_r:httpd_t:s0 
tcontext=unconfined_u:object_r:samba_share_t:s0 tclass=file

type=SYSCALL msg=audit(1226874073.147:96): arch=40000003 syscall=196 success=no exit=-13 
a0=b98df198 a1=bfec85dc a2=54dff4 a3=2008171 items=0 ppid=2463 pid=2465 auid=502 uid=48
gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=6 comm="httpd"
exe="/usr/sbin/httpd" subj=unconfined_u:system_r:httpd_t:s0 key=(null)
  • msg=audit(1226874073.147:96)
    • The number in parentheses is the unformatted time stamp (Epoch time) for the event, which can be converted to standard time by using the date command.
  • { getattr }
    • The item in braces indicates the permission that was denied. getattr indicates the source process was trying to read the target file's status information. This occurs before reading files. This action is denied due to the file being accessed having the wrong label. Commonly seen permissions include getattr, read, and write.
  • comm="httpd"
    • The executable that launched the process. The full path of the executable is found in the exe= section of the system call (SYSCALL) message, which in this case, is exe="/usr/sbin/httpd".
  • path="/var/www/html/file1"
    • The path to the object (target) the process attempted to access.
  • scontext="unconfined_u:system_r:httpd_t:s0"
    • The SELinux context of the process that attempted the denied action. In this case, it is the SELinux context of the Apache HTTP Server, which is running in the httpd_t domain.
  • tcontext="unconfined_u:object_r:samba_share_t:s0"
    • The SELinux context of the object (target) the process attempted to access. In this case, it is the SELinux context of file1. Note: the samba_share_t type is not accessible to processes running in the httpd_t domain.
  • From the system call (SYSCALL) message, two items are of interest:
    • success=no: indicates whether the denial (AVC) was enforced or not. success=no indicates the system call was not successful (SELinux denied access). success=yes indicates the system call was successful - this can be seen for permissive domains or unconfined domains, such as initrc_t and kernel_t.
    • exe="/usr/sbin/httpd": the full path to the executable that launched the process, which in this case, is exe="/usr/sbin/httpd".

contains 36 rules

Configure auditd Data Retentiongroup

The audit system writes data to /var/log/audit/audit.log. By default, auditd rotates 5 logs by size (6MB), retaining a maximum of 30MB of data in total, and refuses to write entries when the disk is too full. This minimizes the risk of audit data filling its partition and impacting other services. This also minimizes the risk of the audit daemon temporarily disabling the system if it cannot write audit log (which it can be configured to do). For a busy system or a system which is thoroughly auditing system activity, the default settings for data retention may be insufficient. The log file size needed will depend heavily on what types of events are being audited. First configure auditing to log all the events of interest. Then monitor the log size manually for awhile to determine what file size will allow you to keep the required data for the correct time period.

Using a dedicated partition for /var/log/audit prevents the auditd logs from disrupting system functionality if they fill, and, more importantly, prevents other activity in /var from filling the partition and stopping the audit trail. (The audit logs are size-limited and therefore unlikely to grow without bound unless configured to do so.) Some machines may have requirements that no actions occur which cannot be audited. If this is the case, then auditd can be configured to halt the machine if it runs out of space. Note: Since older logs are rotated, configuring auditd this way does not prevent older logs from being rotated away before they can be viewed. If your system is configured to halt when logging cannot be performed, make sure this can never happen under normal circumstances! Ensure that /var/log/audit is on its own partition, and that this partition is larger than the maximum amount of data auditd will retain normally.

references:  AU-11, 138

contains 6 rules

Configure auditd Number of Logs Retainedrule

Determine how many log files auditd should retain when it rotates logs. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting NUMLOGS with the correct value of 5:

num_logs = NUMLOGS
Set the value to 5 for general-purpose systems. Note that values less than 2 result in no log rotation.

Rationale:

The total storage for audit log files must be large enough to retain log information over the period required. This is a function of the maximum log file size and the number of logs retained.

identifiers:  CCE-27522-2, DISA FSO RHEL-06-000159

references:  AU-1(b), AU-11, IR-5, Test attestation on 20121024 by DS

Configure auditd Max Log File Sizerule

Determine the amount of audit data (in megabytes) which should be retained in each log file. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting the correct value of 6 for STOREMB:

max_log_file = STOREMB
Set the value to 6 (MB) or higher for general-purpose systems. Larger values, of course, support retention of even more audit data.

Rationale:

The total storage for audit log files must be large enough to retain log information over the period required. This is a function of the maximum log file size and the number of logs retained.

identifiers:  CCE-27550-3, DISA FSO RHEL-06-000160

references:  AU-1(b), AU-11, IR-5, Test attestation on 20121024 by DS

Configure auditd max_log_file_action Upon Reaching Maximum Log Sizerule

The default action to take when the logs reach their maximum size is to rotate the log files, discarding the oldest one. To configure the action taken by auditd, add or correct the line in /etc/audit/auditd.conf:

max_log_file_action = ACTION
Possible values for ACTION are described in the auditd.conf man page. These include:
  • ignore
  • syslog
  • suspend
  • rotate
  • keep_logs
Set the ACTION to rotate to ensure log rotation occurs. This is the default. The setting is case-insensitive.

Rationale:

Automatically rotating logs (by setting this to rotate) minimizes the chances of the system unexpectedly running out of disk space by being overwhelmed with log data. However, for systems that must never discard log data, or which use external processes to transfer it and reclaim space, keep_logs can be employed.

identifiers:  CCE-27237-7, DISA FSO RHEL-06-000161

references:  AU-1(b), AU-4, AU-11, IR-5, Test attestation on 20121024 by DS

Configure auditd space_left Action on Low Disk Spacerule

The auditd service can be configured to take an action when disk space starts to run low. Edit the file /etc/audit/auditd.conf. Modify the following line, substituting ACTION appropriately:

space_left_action = ACTION
Possible values for ACTION are described in the auditd.conf man page. These include:
  • ignore
  • syslog
  • email
  • exec
  • suspend
  • single
  • halt
Set this to email (instead of the default, which is suspend) as it is more likely to get prompt attention. Acceptable values also include suspend, single, and halt.

Rationale:

Notifying administrators of an impending disk space problem may allow them to take corrective action prior to any disruption.

identifiers:  CCE-27238-5, DISA FSO RHEL-06-000005

references:  AU-1(b), AU-4, AU-5(b), IR-5, 140, 143, Test attestation on 20121024 by DS

Remediation script:
var_auditd_space_left_action="email"
#
# If space_left_action present in /etc/audit/auditd.conf, change value
# to var_auditd_space_left_action, else
# add "space_left_action = $var_auditd_space_left_action" to /etc/audit/auditd.conf
#

if grep --silent ^space_left_action /etc/audit/auditd.conf ; then
        sed -i 's/^space_left_action.*/space_left_action = '"$var_auditd_space_left_action"'/g' /etc/audit/auditd.conf
else
        echo -e "\n# Set space_left_action to $var_auditd_space_left_action per security requirements" >> /etc/audit/auditd.conf
        echo "space_left_action = $var_auditd_space_left_action" >> /etc/audit/auditd.conf
fi

Configure auditd admin_space_left Action on Low Disk Spacerule

The auditd service can be configured to take an action when disk space is running low but prior to running out of space completely. Edit the file /etc/audit/auditd.conf. Add or modify the following line, substituting ACTION appropriately:

admin_space_left_action = ACTION
Set this value to single to cause the system to switch to single-user mode for corrective action. Acceptable values also include suspend and halt. For certain systems, the need for availability outweighs the need to log all actions, and a different setting should be determined. Details regarding all possible values for ACTION are described in the auditd.conf man page.

Rationale:

Administrators should be made aware of an inability to record audit records. If a separate partition or logical volume of adequate size is used, running low on space for audit records should never occur.

identifiers:  CCE-27239-3

references:  AU-1(b), AU-4, AU-5(b), IR-5, 140, 1343, Test attestation on 20121024 by DS

Remediation script:
var_auditd_admin_space_left_action="single"
grep -q ^admin_space_left_action /etc/audit/auditd.conf && \
  sed -i "s/admin_space_left_action.*/admin_space_left_action = $var_auditd_admin_space_left_action/g" /etc/audit/auditd.conf
if ! [ $? -eq 0 ]; then
    echo "admin_space_left_action = $var_auditd_admin_space_left_action" >> /etc/audit/auditd.conf
fi

Configure auditd mail_acct Action on Low Disk Spacerule

The auditd service can be configured to send email to a designated account in certain situations. Add or correct the following line in /etc/audit/auditd.conf to ensure that administrators are notified via email for those situations:

action_mail_acct = root

Rationale:

Email sent to the root account is typically aliased to the administrators of the system, who can take appropriate action.

identifiers:  CCE-27241-9, DISA FSO RHEL-06-000313

references:  AU-1(b), AU-4, AU-5(a), IR-5, 139, 144

Configure auditd Rules for Comprehensive Auditinggroup

The auditd program can perform comprehensive monitoring of system activity. This section describes recommended configuration settings for comprehensive auditing, but a full description of the auditing system's capabilities is beyond the scope of this guide. The mailing list linux-audit@redhat.com exists to facilitate community discussion of the auditing system.

The audit subsystem supports extensive collection of events, including:

  • Tracing of arbitrary system calls (identified by name or number) on entry or exit.
  • Filtering by PID, UID, call success, system call argument (with some limitations), etc.
  • Monitoring of specific files for modifications to the file's contents or metadata.

Auditing rules at startup are controlled by the file /etc/audit/audit.rules. Add rules to it to meet the auditing requirements for your organization. Each line in /etc/audit/audit.rules represents a series of arguments that can be passed to auditctl and can be individually tested during runtime. See documentation in /usr/share/doc/audit-VERSION and in the related man pages for more details.

If copying any example audit rulesets from /usr/share/doc/audit-VERSION, be sure to comment out the lines containing arch= which are not appropriate for your system's architecture. Then review and understand the following rules, ensuring rules are activated as needed for the appropriate architecture.

After reviewing all the rules, reading the following sections, and editing as needed, the new rules can be activated as follows:
$ sudo service auditd restart

contains 28 rules

Records Events that Modify Date and Time Informationgroup

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time. All changes to the system time should be audited.

contains 5 rules

Record attempts to alter time through adjtimexrule

On a 32-bit system, add the following to /etc/audit/audit.rules:

# audit_time_rules
-a always,exit -F arch=b32 -S adjtimex -k audit_time_rules
On a 64-bit system, add the following to /etc/audit/audit.rules:
# audit_time_rules
-a always,exit -F arch=b64 -S adjtimex -k audit_time_rules
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex -S settimeofday -S clock_settime 
-k audit_time_rules

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

identifiers:  CCE-26242-8, DISA FSO RHEL-06-000165

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 1487, 169

Remediation script:

# audit.rules file to operate at
AUDIT_RULES_FILE="/etc/audit/audit.rules"

# General form / skeleton of an audit rule to search for
BASE_SEARCH_RULE='-a always,exit .* -k audit_time_rules'

# System calls group to search for
SYSCALL_GROUP="time"

# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && ARCHS=("b32") || ARCHS=("b32" "b64")

# Perform the remediation depending on the system's architecture:
# * on 32 bit system, operate just at '-F arch=b32' audit rules
# * on 64 bit system, operate at both '-F arch=b32' & '-F arch=b64' audit rules
for ARCH in ${ARCHS[@]}
do

  # Create expected audit rule form for particular system call & architecture
  if [ ${ARCH} = "b32" ]
  then
    # stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
    # so append it to the list of time group system calls to be audited
    EXPECTED_RULE="-a always,exit -F arch=b32 -S adjtimex -S settimeofday -S stime -k audit_time_rules"
  else
    # stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
    # therefore don't add it to the list of time group system calls to be audited
    EXPECTED_RULE="-a always,exit -F arch=b64 -S adjtimex -S settimeofday -k audit_time_rules"
  fi

  # Indicator that we want to append $EXPECTED_RULE for key & arch into
  # audit.rules by default
  APPEND_EXPECTED_RULE=0

  # From all the existing /etc/audit.rule definitions select those, which:
  # * follow the common audit rule form ($BASE_SEARCH_RULE above)
  # * meet the hardware architecture requirement, and
  # * are current $SYSCALL_GROUP specific
  IFS=$'\n' EXISTING_KEY_ARCH_RULES=($(sed -e "/${BASE_SEARCH_RULE}/!d" -e "/${ARCH}/!d" -e "/${SYSCALL_GROUP}/!d"  ${AUDIT_RULES_FILE}))

  # Process found rules case by case
  for RULE in ${EXISTING_KEY_ARCH_RULES[@]}
  do
    # Found rule is for same arch & syscall group, but differs slightly (in count of -S arguments)
    if [ ${RULE} != ${EXPECTED_RULE} ]
    then
      # If so, isolate just '-S syscall' substring of that rule
      RULE_SYSCALLS=$(echo ${RULE} | grep -o -P '(-S \w+ )+')

        # Check if list of '-S syscall' arguments of that rule is a subset
        # '-S syscall' list from the expected form ($EXPECTED_RULE)
        if [ $(echo ${EXPECTED_RULE} | grep -- ${RULE_SYSCALLS}) ]
        then
          # If so, this audit rule is covered when we append expected rule
          # later & therefore the rule can be deleted.
          #
          # Thus delete the rule from both - the audit.rules file and
          # our $EXISTING_KEY_ARCH_RULES array
          sed -i -e "/${RULE}/d" ${AUDIT_RULES_FILE}
          EXISTING_KEY_ARCH_RULES=(${EXISTING_KEY_ARCH_RULES[@]//${RULE}/})
        else
          # Rule isn't covered by $EXPECTED_RULE - in other words it besides
          # adjtimex, settimeofday, or stime -S arguments contains also -S argument
          # for other time group system call (-S clock_adjtime for example).
          # Example: '-S adjtimex -S clock_adjtime'
          #
          # Therefore:
          # * delete the original rule for arch & key from audit.rules
          #   (original '-S adjtimex -S clock_adjtime' rule would be deleted)
          # * delete $SYSCALL_GROUP -S arguments from the rule,
          #   but keep those not from this $SYSCALL_GROUP
          #   (original '-S adjtimex -S clock_adjtime' would become '-S clock_adjtime')
          # * append the modified (filtered) rule again into audit.rules
          #   if the same rule not already present
          #   (new rule for same arch & key with '-S clock_adjtime' would be appended
          #    if not present yet)
          sed -i -e "/${RULE}/d" ${AUDIT_RULES_FILE}

          if [ ${ARCH} = "b32" ]
          then
            # On 32-bit arch drop ' -S (adjtimex|settimeofday|stime)' from the rule's
            # system call list
            NEW_SYSCALLS_FOR_RULE=$(echo ${RULE_SYSCALLS} | sed -r -e "s/[\s]*-S (adjtimex|settimeofday|stime)//g")
          else
            # On 64-bit arch drop ' -S (adjtimex|settimeofday)' from the rule's
            # system call list ('stime' call isn't known, see "$ ausyscall .." examples above)
            NEW_SYSCALLS_FOR_RULE=$(echo ${RULE_SYSCALLS} | sed -r -e "s/[\s]*-S (adjtimex|settimeofday)//g")
          fi
          # Update the list of system calls for new rule to contain those from new syscalls list
          UPDATED_RULE=$(echo ${RULE} | sed "s/${RULE_SYSCALLS}/${NEW_SYSCALLS_FOR_RULE}/g")
          # Squeeze repeated whitespace characters in rule definition (if any) into one
          UPDATED_RULE=$(echo ${UPDATED_RULE} | tr -s '[:space:]')
          # Insert updated rule into /etc/audit/audit.rules only in case it's not
          # present yet to prevent duplicate same rules
          if [ ! $(grep -- ${UPDATED_RULE} ${AUDIT_RULES_FILE}) ]
          then
            echo ${UPDATED_RULE} >> ${AUDIT_RULES_FILE}
          fi
        fi

    else
      # /etc/audit/audit.rules already contains the expected rule form for this
      # architecture & key => don't insert it second time
      APPEND_EXPECTED_RULE=1
    fi
  done

  # We deleted all rules that were subset of the expected one for this arch & key.
  # Also isolated rules containing system calls not from this system calls group.
  # Now append the expected rule if it's not present in audit.rules yet
  if [[ ${APPEND_EXPECTED_RULE} -eq "0" ]]
  then
    echo ${EXPECTED_RULE} >> ${AUDIT_RULES_FILE}
  fi
done

Record attempts to alter time through settimeofdayrule

On a 32-bit system, add the following to /etc/audit/audit.rules:

# audit_time_rules
-a always,exit -F arch=b32 -S settimeofday -k audit_time_rules
On a 64-bit system, add the following to /etc/audit/audit.rules:
# audit_time_rules
-a always,exit -F arch=b64 -S settimeofday -k audit_time_rules
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex -S settimeofday -S clock_settime 
-k audit_time_rules

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

identifiers:  CCE-27203-9, DISA FSO RHEL-06-000167

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 1487, 169

Remediation script:

# audit.rules file to operate at
AUDIT_RULES_FILE="/etc/audit/audit.rules"

# General form / skeleton of an audit rule to search for
BASE_SEARCH_RULE='-a always,exit .* -k audit_time_rules'

# System calls group to search for
SYSCALL_GROUP="time"

# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && ARCHS=("b32") || ARCHS=("b32" "b64")

# Perform the remediation depending on the system's architecture:
# * on 32 bit system, operate just at '-F arch=b32' audit rules
# * on 64 bit system, operate at both '-F arch=b32' & '-F arch=b64' audit rules
for ARCH in ${ARCHS[@]}
do

  # Create expected audit rule form for particular system call & architecture
  if [ ${ARCH} = "b32" ]
  then
    # stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
    # so append it to the list of time group system calls to be audited
    EXPECTED_RULE="-a always,exit -F arch=b32 -S adjtimex -S settimeofday -S stime -k audit_time_rules"
  else
    # stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
    # therefore don't add it to the list of time group system calls to be audited
    EXPECTED_RULE="-a always,exit -F arch=b64 -S adjtimex -S settimeofday -k audit_time_rules"
  fi

  # Indicator that we want to append $EXPECTED_RULE for key & arch into
  # audit.rules by default
  APPEND_EXPECTED_RULE=0

  # From all the existing /etc/audit.rule definitions select those, which:
  # * follow the common audit rule form ($BASE_SEARCH_RULE above)
  # * meet the hardware architecture requirement, and
  # * are current $SYSCALL_GROUP specific
  IFS=$'\n' EXISTING_KEY_ARCH_RULES=($(sed -e "/${BASE_SEARCH_RULE}/!d" -e "/${ARCH}/!d" -e "/${SYSCALL_GROUP}/!d"  ${AUDIT_RULES_FILE}))

  # Process found rules case by case
  for RULE in ${EXISTING_KEY_ARCH_RULES[@]}
  do
    # Found rule is for same arch & syscall group, but differs slightly (in count of -S arguments)
    if [ ${RULE} != ${EXPECTED_RULE} ]
    then
      # If so, isolate just '-S syscall' substring of that rule
      RULE_SYSCALLS=$(echo ${RULE} | grep -o -P '(-S \w+ )+')

        # Check if list of '-S syscall' arguments of that rule is a subset
        # '-S syscall' list from the expected form ($EXPECTED_RULE)
        if [ $(echo ${EXPECTED_RULE} | grep -- ${RULE_SYSCALLS}) ]
        then
          # If so, this audit rule is covered when we append expected rule
          # later & therefore the rule can be deleted.
          #
          # Thus delete the rule from both - the audit.rules file and
          # our $EXISTING_KEY_ARCH_RULES array
          sed -i -e "/${RULE}/d" ${AUDIT_RULES_FILE}
          EXISTING_KEY_ARCH_RULES=(${EXISTING_KEY_ARCH_RULES[@]//${RULE}/})
        else
          # Rule isn't covered by $EXPECTED_RULE - in other words it besides
          # adjtimex, settimeofday, or stime -S arguments contains also -S argument
          # for other time group system call (-S clock_adjtime for example).
          # Example: '-S adjtimex -S clock_adjtime'
          #
          # Therefore:
          # * delete the original rule for arch & key from audit.rules
          #   (original '-S adjtimex -S clock_adjtime' rule would be deleted)
          # * delete $SYSCALL_GROUP -S arguments from the rule,
          #   but keep those not from this $SYSCALL_GROUP
          #   (original '-S adjtimex -S clock_adjtime' would become '-S clock_adjtime')
          # * append the modified (filtered) rule again into audit.rules
          #   if the same rule not already present
          #   (new rule for same arch & key with '-S clock_adjtime' would be appended
          #    if not present yet)
          sed -i -e "/${RULE}/d" ${AUDIT_RULES_FILE}

          if [ ${ARCH} = "b32" ]
          then
            # On 32-bit arch drop ' -S (adjtimex|settimeofday|stime)' from the rule's
            # system call list
            NEW_SYSCALLS_FOR_RULE=$(echo ${RULE_SYSCALLS} | sed -r -e "s/[\s]*-S (adjtimex|settimeofday|stime)//g")
          else
            # On 64-bit arch drop ' -S (adjtimex|settimeofday)' from the rule's
            # system call list ('stime' call isn't known, see "$ ausyscall .." examples above)
            NEW_SYSCALLS_FOR_RULE=$(echo ${RULE_SYSCALLS} | sed -r -e "s/[\s]*-S (adjtimex|settimeofday)//g")
          fi
          # Update the list of system calls for new rule to contain those from new syscalls list
          UPDATED_RULE=$(echo ${RULE} | sed "s/${RULE_SYSCALLS}/${NEW_SYSCALLS_FOR_RULE}/g")
          # Squeeze repeated whitespace characters in rule definition (if any) into one
          UPDATED_RULE=$(echo ${UPDATED_RULE} | tr -s '[:space:]')
          # Insert updated rule into /etc/audit/audit.rules only in case it's not
          # present yet to prevent duplicate same rules
          if [ ! $(grep -- ${UPDATED_RULE} ${AUDIT_RULES_FILE}) ]
          then
            echo ${UPDATED_RULE} >> ${AUDIT_RULES_FILE}
          fi
        fi

    else
      # /etc/audit/audit.rules already contains the expected rule form for this
      # architecture & key => don't insert it second time
      APPEND_EXPECTED_RULE=1
    fi
  done

  # We deleted all rules that were subset of the expected one for this arch & key.
  # Also isolated rules containing system calls not from this system calls group.
  # Now append the expected rule if it's not present in audit.rules yet
  if [[ ${APPEND_EXPECTED_RULE} -eq "0" ]]
  then
    echo ${EXPECTED_RULE} >> ${AUDIT_RULES_FILE}
  fi
done

Record Attempts to Alter Time Through stimerule

On a 32-bit system, add the following to /etc/audit/audit.rules:

# audit_time_rules
-a always,exit -F arch=b32 -S stime -k audit_time_rules
On a 64-bit system, the "-S stime" is not necessary. The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex -S settimeofday -S clock_settime 
-k audit_time_rules

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

identifiers:  CCE-27169-2, DISA FSO RHEL-06-000169

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 1487, 169

Remediation script:

# audit.rules file to operate at
AUDIT_RULES_FILE="/etc/audit/audit.rules"

# General form / skeleton of an audit rule to search for
BASE_SEARCH_RULE='-a always,exit .* -k audit_time_rules'

# System calls group to search for
SYSCALL_GROUP="time"

# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && ARCHS=("b32") || ARCHS=("b32" "b64")

# Perform the remediation depending on the system's architecture:
# * on 32 bit system, operate just at '-F arch=b32' audit rules
# * on 64 bit system, operate at both '-F arch=b32' & '-F arch=b64' audit rules
for ARCH in ${ARCHS[@]}
do

  # Create expected audit rule form for particular system call & architecture
  if [ ${ARCH} = "b32" ]
  then
    # stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
    # so append it to the list of time group system calls to be audited
    EXPECTED_RULE="-a always,exit -F arch=b32 -S adjtimex -S settimeofday -S stime -k audit_time_rules"
  else
    # stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
    # therefore don't add it to the list of time group system calls to be audited
    EXPECTED_RULE="-a always,exit -F arch=b64 -S adjtimex -S settimeofday -k audit_time_rules"
  fi

  # Indicator that we want to append $EXPECTED_RULE for key & arch into
  # audit.rules by default
  APPEND_EXPECTED_RULE=0

  # From all the existing /etc/audit.rule definitions select those, which:
  # * follow the common audit rule form ($BASE_SEARCH_RULE above)
  # * meet the hardware architecture requirement, and
  # * are current $SYSCALL_GROUP specific
  IFS=$'\n' EXISTING_KEY_ARCH_RULES=($(sed -e "/${BASE_SEARCH_RULE}/!d" -e "/${ARCH}/!d" -e "/${SYSCALL_GROUP}/!d"  ${AUDIT_RULES_FILE}))

  # Process found rules case by case
  for RULE in ${EXISTING_KEY_ARCH_RULES[@]}
  do
    # Found rule is for same arch & syscall group, but differs slightly (in count of -S arguments)
    if [ ${RULE} != ${EXPECTED_RULE} ]
    then
      # If so, isolate just '-S syscall' substring of that rule
      RULE_SYSCALLS=$(echo ${RULE} | grep -o -P '(-S \w+ )+')

        # Check if list of '-S syscall' arguments of that rule is a subset
        # '-S syscall' list from the expected form ($EXPECTED_RULE)
        if [ $(echo ${EXPECTED_RULE} | grep -- ${RULE_SYSCALLS}) ]
        then
          # If so, this audit rule is covered when we append expected rule
          # later & therefore the rule can be deleted.
          #
          # Thus delete the rule from both - the audit.rules file and
          # our $EXISTING_KEY_ARCH_RULES array
          sed -i -e "/${RULE}/d" ${AUDIT_RULES_FILE}
          EXISTING_KEY_ARCH_RULES=(${EXISTING_KEY_ARCH_RULES[@]//${RULE}/})
        else
          # Rule isn't covered by $EXPECTED_RULE - in other words it besides
          # adjtimex, settimeofday, or stime -S arguments contains also -S argument
          # for other time group system call (-S clock_adjtime for example).
          # Example: '-S adjtimex -S clock_adjtime'
          #
          # Therefore:
          # * delete the original rule for arch & key from audit.rules
          #   (original '-S adjtimex -S clock_adjtime' rule would be deleted)
          # * delete $SYSCALL_GROUP -S arguments from the rule,
          #   but keep those not from this $SYSCALL_GROUP
          #   (original '-S adjtimex -S clock_adjtime' would become '-S clock_adjtime')
          # * append the modified (filtered) rule again into audit.rules
          #   if the same rule not already present
          #   (new rule for same arch & key with '-S clock_adjtime' would be appended
          #    if not present yet)
          sed -i -e "/${RULE}/d" ${AUDIT_RULES_FILE}

          if [ ${ARCH} = "b32" ]
          then
            # On 32-bit arch drop ' -S (adjtimex|settimeofday|stime)' from the rule's
            # system call list
            NEW_SYSCALLS_FOR_RULE=$(echo ${RULE_SYSCALLS} | sed -r -e "s/[\s]*-S (adjtimex|settimeofday|stime)//g")
          else
            # On 64-bit arch drop ' -S (adjtimex|settimeofday)' from the rule's
            # system call list ('stime' call isn't known, see "$ ausyscall .." examples above)
            NEW_SYSCALLS_FOR_RULE=$(echo ${RULE_SYSCALLS} | sed -r -e "s/[\s]*-S (adjtimex|settimeofday)//g")
          fi
          # Update the list of system calls for new rule to contain those from new syscalls list
          UPDATED_RULE=$(echo ${RULE} | sed "s/${RULE_SYSCALLS}/${NEW_SYSCALLS_FOR_RULE}/g")
          # Squeeze repeated whitespace characters in rule definition (if any) into one
          UPDATED_RULE=$(echo ${UPDATED_RULE} | tr -s '[:space:]')
          # Insert updated rule into /etc/audit/audit.rules only in case it's not
          # present yet to prevent duplicate same rules
          if [ ! $(grep -- ${UPDATED_RULE} ${AUDIT_RULES_FILE}) ]
          then
            echo ${UPDATED_RULE} >> ${AUDIT_RULES_FILE}
          fi
        fi

    else
      # /etc/audit/audit.rules already contains the expected rule form for this
      # architecture & key => don't insert it second time
      APPEND_EXPECTED_RULE=1
    fi
  done

  # We deleted all rules that were subset of the expected one for this arch & key.
  # Also isolated rules containing system calls not from this system calls group.
  # Now append the expected rule if it's not present in audit.rules yet
  if [[ ${APPEND_EXPECTED_RULE} -eq "0" ]]
  then
    echo ${EXPECTED_RULE} >> ${AUDIT_RULES_FILE}
  fi
done

Record Attempts to Alter Time Through clock_settimerule

On a 32-bit system, add the following to /etc/audit/audit.rules:

# audit_time_rules
-a always,exit -F arch=b32 -S clock_settime -k audit_time_rules
On a 64-bit system, add the following to /etc/audit/audit.rules:
# audit_time_rules
-a always,exit -F arch=b64 -S clock_settime -k audit_time_rules
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex -S settimeofday -S clock_settime 
-k audit_time_rules

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

identifiers:  CCE-27170-0, DISA FSO RHEL-06-000171

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 1487, 169

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in ${RULE_ARCHS[@]}
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -k audit_time_rules"
	GROUP="clock_settime"
	FULL_RULE="-a always,exit -F arch=$ARCH -S clock_settime -k audit_time_rules"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Attempts to Alter the localtime Filerule

Add the following to /etc/audit/audit.rules:

-w /etc/localtime -p wa -k audit_time_rules
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport and should always be used.

Rationale:

Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.

identifiers:  CCE-27172-6, DISA FSO RHEL-06-000173

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 1487, 169

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation
fix_audit_watch_rule "auditctl" "/etc/localtime" "wa" "audit_time_rules"

Record Events that Modify the System's Discretionary Access Controlsgroup

At a minimum, the audit system should collect file permission changes for all users and root. Note that the "-F arch=b32" lines should be present even on a 64 bit system. These commands identify system calls for auditing. Even if the system is 64 bit it can still execute 32 bit system calls. Additionally, these rules can be configured in a number of ways while still achieving the desired effect. An example of this is that the "-S" calls could be split up and placed on separate lines, however, this is less efficient. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S chmod -S fchmod -S fchmodat -F auid>=500 -F auid!=4294967295 -k perm_mod
    -a always,exit -F arch=b32 -S chown -S fchown -S fchownat -S lchown -F auid>=500 -F auid!=4294967295 -k perm_mod
    -a always,exit -F arch=b32 -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod
If your system is 64 bit then these lines should be duplicated and the arch=b32 replaced with arch=b64 as follows:
-a always,exit -F arch=b64 -S chmod -S fchmod -S fchmodat -F auid>=500 -F auid!=4294967295 -k perm_mod
    -a always,exit -F arch=b64 -S chown -S fchown -S fchownat -S lchown -F auid>=500 -F auid!=4294967295 -k perm_mod
    -a always,exit -F arch=b64 -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod

contains 13 rules

Record Events that Modify the System's Discretionary Access Controls - chmodrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S chmod -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S chmod  -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-26280-8, DISA FSO RHEL-06-000184

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="chmod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chmod -S fchmod -S fchmodat -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - chownrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S chown -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S chown -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27173-4, DISA FSO RHEL-06-000185

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in ${RULE_ARCHS[@]}
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="chown"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chown -S fchown -S fchownat -S lchown -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - fchmodrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S fchmod -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S fchmod -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27174-2, DISA FSO RHEL-06-000186

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="chmod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chmod -S fchmod -S fchmodat -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - fchmodatrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S fchmodat -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S fchmodat -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27175-9, DISA FSO RHEL-06-000187

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="chmod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chmod -S fchmod -S fchmodat -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - fchownrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S fchown -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S fchown -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27177-5, DISA FSO RHEL-06-000188

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in ${RULE_ARCHS[@]}
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="chown"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chown -S fchown -S fchownat -S lchown -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - fchownatrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S fchownat -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S fchownat -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27178-3, DISA FSO RHEL-06-000189

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in ${RULE_ARCHS[@]}
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="chown"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chown -S fchown -S fchownat -S lchown -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - fremovexattrrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27179-1, DISA FSO RHEL-06-000190

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="xattr"
	FULL_RULE="-a always,exit -F arch=${ARCH} -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - fsetxattrrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S fsetxattr -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S fsetxattr -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27180-9, DISA FSO RHEL-06-000191

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="xattr"
	FULL_RULE="-a always,exit -F arch=${ARCH} -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - lchownrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S lchown -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S lchown -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27181-7, DISA FSO RHEL-06-000192

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in ${RULE_ARCHS[@]}
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="chown"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chown -S fchown -S fchownat -S lchown -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - lremovexattrrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S lremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S lremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27182-5, DISA FSO RHEL-06-000193

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="xattr"
	FULL_RULE="-a always,exit -F arch=${ARCH} -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - lsetxattrrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S lsetxattr -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S lsetxattr -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27183-3, DISA FSO RHEL-06-000194

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="xattr"
	FULL_RULE="-a always,exit -F arch=${ARCH} -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - removexattrrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S removexattr -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S removexattr -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27184-1, DISA FSO RHEL-06-000195

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="xattr"
	FULL_RULE="-a always,exit -F arch=${ARCH} -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify the System's Discretionary Access Controls - setxattrrule

At a minimum the audit system should collect file permission changes for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S setxattr -F auid>=500 -F auid!=4294967295 -k perm_mod
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S setxattr -F auid>=500 -F auid!=4294967295 -k perm_mod

warning  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:

The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.

identifiers:  CCE-27185-8, DISA FSO RHEL-06-000196

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="xattr"
	FULL_RULE="-a always,exit -F arch=${ARCH} -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>=500 -F auid!=4294967295 -k perm_mod"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Record Events that Modify User/Group Informationrule

Add the following to /etc/audit/audit.rules, in order to capture events that modify account changes:

# audit_rules_usergroup_modification
-w /etc/group -p wa -k audit_rules_usergroup_modification
-w /etc/passwd -p wa -k audit_rules_usergroup_modification
-w /etc/gshadow -p wa -k audit_rules_usergroup_modification
-w /etc/shadow -p wa -k audit_rules_usergroup_modification
-w /etc/security/opasswd -p wa -k audit_rules_usergroup_modification

Rationale:

In addition to auditing new user and group accounts, these watches will alert the system administrator(s) to any modifications. Any unexpected users, groups, or modifications should be investigated for legitimacy.

identifiers:  CCE-26664-3, DISA FSO RHEL-06-000174

references:  AC-2(4), AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 18, 1403, 1404, 1405, 1684, 1683, 1685, 1686

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation
fix_audit_watch_rule "auditctl" "/etc/group" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "auditctl" "/etc/passwd" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "auditctl" "/etc/gshadow" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "auditctl" "/etc/shadow" "wa" "audit_rules_usergroup_modification"
fix_audit_watch_rule "auditctl" "/etc/security/opasswd" "wa" "audit_rules_usergroup_modification"

Record Events that Modify the System's Network Environmentrule

Add the following to /etc/audit/audit.rules, setting ARCH to either b32 or b64 as appropriate for your system:

# audit_rules_networkconfig_modification
-a always,exit -F arch=ARCH -S sethostname -S setdomainname -k audit_rules_networkconfig_modification
-w /etc/issue -p wa -k audit_rules_networkconfig_modification
-w /etc/issue.net -p wa -k audit_rules_networkconfig_modification
-w /etc/hosts -p wa -k audit_rules_networkconfig_modification
-w /etc/sysconfig/network -p wa -k audit_rules_networkconfig_modification

Rationale:

The network environment should not be modified by anything other than administrator action. Any change to network parameters should be audited.

identifiers:  CCE-26648-6, DISA FSO RHEL-06-000182

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="set\(host\|domain\)name"
	FULL_RULE="-a always,exit -F arch=$ARCH -S sethostname -S setdomainname -k audit_rules_networkconfig_modification"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

# Then perform the remediations for the watch rules
fix_audit_watch_rule "auditctl" "/etc/issue" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "auditctl" "/etc/issue.net" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "auditctl" "/etc/hosts" "wa" "audit_rules_networkconfig_modification"
fix_audit_watch_rule "auditctl" "/etc/sysconfig/network" "wa" "audit_rules_networkconfig_modification"

System Audit Logs Must Have Mode 0640 or Less Permissiverule

Change the mode of the audit log files with the following command:

$ sudo chmod 0640 audit_file

Rationale:

If users can write to audit logs, audit trails can be modified or destroyed.

identifiers:  CCE-27243-5, DISA FSO RHEL-06-000383

references:  AC-6, AU-1(b), AU-9, IR-5, 166, Test attestation on 20121024 by DS

Remediation script:
chmod -R 640 /var/log/audit/*
chmod 640 /etc/audit/audit.rules

Record Events that Modify the System's Mandatory Access Controlsrule

Add the following to /etc/audit/audit.rules:

-w /etc/selinux/ -p wa -k MAC-policy

Rationale:

The system's mandatory access policy (SELinux) should not be arbitrarily changed by anything other than administrator action. All changes to MAC policy should be audited.

identifiers:  CCE-26657-7, DISA FSO RHEL-06-000183

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation
fix_audit_watch_rule "auditctl" "/etc/selinux/" "wa" "MAC-policy"

Ensure auditd Collects Unauthorized Access Attempts to Files (unsuccessful)rule

At a minimum the audit system should collect unauthorized file accesses for all users and root. Add the following to /etc/audit/audit.rules:

-a always,exit -F arch=b32 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>=500 -F auid!=4294967295 -k access
-a always,exit -F arch=b32 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>=500 -F auid!=4294967295 -k access
If the system is 64 bit then also add the following:
-a always,exit -F arch=b64 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>=500 -F auid!=4294967295 -k access
-a always,exit -F arch=b64 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>=500 -F auid!=4294967295 -k access

Rationale:

Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.

identifiers:  CCE-26712-0, DISA FSO RHEL-06-000197

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do

	# First fix the -EACCES requirement
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F exit=-EACCES -F auid>=500 -F auid!=4294967295 -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="\(creat\|open\|truncate\)"
	FULL_RULE="-a always,exit -F arch=$ARCH -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>=500 -F auid!=4294967295 -k access"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

	# Then fix the -EPERM requirement
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F exit=-EPERM -F auid>=500 -F auid!=4294967295 -k *"
	# No need to change content of $GROUP variable - it's the same as for -EACCES case above
	FULL_RULE="-a always,exit -F arch=$ARCH -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>=500 -F auid!=4294967295 -k access"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

done

Ensure auditd Collects Information on the Use of Privileged Commandsrule

At a minimum the audit system should collect the execution of privileged commands for all users and root. To find the relevant setuid / setgid programs, run the following command for each local partition PART:

$ sudo find PART -xdev -type f -perm -4000 -o -type f -perm -2000 2>/dev/null
Then, for each setuid / setgid program on the system, add a line of the following form to /etc/audit/audit.rules, where SETUID_PROG_PATH is the full path to each setuid / setgid program in the list:
-a always,exit -F path=SETUID_PROG_PATH -F perm=x -F auid>=500 -F auid!=4294967295 -k privileged

Rationale:

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.

identifiers:  CCE-26457-2, DISA FSO RHEL-06-000198

references:  AC-3(10)), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AC-6(9), AU-12(a), AU-12(c), IR-5, 40, Test attestation on 20140703 by JL

Remediation script:

readonly AUDIT_RULES='/etc/audit/audit.rules'

# Obtain the list of SUID/SGID binaries on the particular system into PRIVILEGED_BINARIES array
PRIVILEGED_BINARIES=($(find / -xdev -type f -perm -4000 -o -type f -perm -2000 2>/dev/null))

# Keep list of SUID/SGID binaries that have been already handled within some previous iteration
declare -a SBINARIES_TO_SKIP=()

# For each found binary from that list...
for SBINARY in ${PRIVILEGED_BINARIES[@]}
do

    # Replace possible slash '/' character in SBINARY definition so we could use it in sed expressions below
    SBINARY_ESC=${SBINARY//$'/'/$'\/'}

    # Check if this SBINARY wasn't already handled in some of the previous iterations
    if [[ $(sed -ne "/$SBINARY_ESC/p" <<< ${SBINARIES_TO_SKIP[@]}) ]]
    then
        # If so, don't process it second time & go to process next SBINARY
        continue
    fi

    # Search existing audit.rule's content for match. Match criteria:
    # * existing rule is for the same SUID/SGID binary we are currently processing (but
    #   can contain multiple -F path= elements covering multiple SUID/SGID binaries)
    # * existing rule contains all arguments from expected rule form (though can contain
    #   them in arbitrary order)
    BASE_SEARCH=$(sed -e "/-a always,exit/!d" -e "/-F path=${SBINARY_ESC}/!d"	\
                      -e "/-F path=[^[:space:]]\+/!d" -e "/-F perm=.*/!d"	\
                      -e "/-F auid>=500/!d" -e "/-F auid!=4294967295/!d"	\
                      -e "/-k privileged/!d" $AUDIT_RULES)

    # Define expected rule form for this binary
    EXPECTED_RULE="-a always,exit -F path=${SBINARY} -F perm=x -F auid>=500 -F auid!=4294967295 -k privileged"

    # Require execute access type to be set for existing audit rule
    EXEC_ACCESS='x'

    # Search existing audit.rules content for presence of rule pattern for this binary
    if [[ $BASE_SEARCH ]]
    then

        # Current /etc/audit/audit.rules already contains rule for this binary =>
        # Store the exact form of found rule for this binary for further processing
        CONCRETE_RULE=$BASE_SEARCH

        # Select all other SUID/SGID binaries possibly also present in the found rule
        IFS=$'\n' HANDLED_SBINARIES=($(grep -o -e "-F path=[^[:space:]]\+" <<< $CONCRETE_RULE))
        IFS=$' ' HANDLED_SBINARIES=(${HANDLED_SBINARIES[@]//-F path=/})

        # Merge the list of such SUID/SGID binaries found in this iteration with global list ignoring duplicates
        SBINARIES_TO_SKIP=($(for i in "${SBINARIES_TO_SKIP[@]}" "${HANDLED_SBINARIES[@]}"; do echo $i; done | sort -du))

        # Separate CONCRETE_RULE into three sections using hash '#'
        # sign as a delimiter around rule's permission section borders
        CONCRETE_RULE=$(echo $CONCRETE_RULE | sed -n "s/\(.*\)\+\(-F perm=[rwax]\+\)\+/\1#\2#/p")

        # Split CONCRETE_RULE into head, perm, and tail sections using hash '#' delimiter
        IFS=$'#' read RULE_HEAD RULE_PERM RULE_TAIL <<<  "$CONCRETE_RULE"

        # Extract already present exact access type [r|w|x|a] from rule's permission section
        ACCESS_TYPE=${RULE_PERM//-F perm=/}

        # Verify current permission access type(s) for rule contain 'x' (execute) permission
        if ! grep -q "$EXEC_ACCESS" <<< "$ACCESS_TYPE"
        then

            # If not, append the 'x' (execute) permission to the existing access type bits
            ACCESS_TYPE="$ACCESS_TYPE$EXEC_ACCESS"
            # Reconstruct the permissions section for the rule
            NEW_RULE_PERM="-F perm=$ACCESS_TYPE"
            # Update existing rule in /etc/audit/audit.rules with the new permission section
            sed -i "s#${RULE_HEAD}\(.*\)${RULE_TAIL}#${RULE_HEAD}${NEW_RULE_PERM}${RULE_TAIL}#" $AUDIT_RULES

        fi

    else

        # Current /etc/audit/audit.rules content doesn't contain expected rule for this
        # SUID/SGID binary yet => append it
        echo $EXPECTED_RULE >> $AUDIT_RULES
    fi

done

Ensure auditd Collects Information on Exporting to Media (successful)rule

At a minimum the audit system should collect media exportation events for all users and root. Add the following to /etc/audit/audit.rules, setting ARCH to either b32 or b64 as appropriate for your system:

-a always,exit -F arch=ARCH -S mount -F auid>=500 -F auid!=4294967295 -k export

Rationale:

The unauthorized exportation of data to external media could result in an information leak where classified information, Privacy Act information, and intellectual property could be lost. An audit trail should be created each time a filesystem is mounted to help identify and guard against information loss.

identifiers:  CCE-26573-6, DISA FSO RHEL-06-000199

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126, Test attestation on 20121024 by DS

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k *"
	GROUP="mount"
	FULL_RULE="-a always,exit -F arch=$ARCH -S mount -F auid>=500 -F auid!=4294967295 -k export"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Ensure auditd Collects File Deletion Events by Userrule

At a minimum the audit system should collect file deletion events for all users and root. Add the following to /etc/audit/audit.rules, setting ARCH to either b32 or b64 as appropriate for your system:

-a always,exit -F arch=ARCH -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>=500 -F auid!=4294967295 -k delete

Rationale:

Auditing file deletions will create an audit trail for files that are removed from the system. The audit trail could aid in system troubleshooting, as well as, detecting malicious processes that attempt to delete log files to conceal their presence.

identifiers:  CCE-26651-0, DISA FSO RHEL-06-000200

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation for the syscall rule
# Retrieve hardware architecture of the underlying system
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in ${RULE_ARCHS[@]}
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F auid>=500 -F auid!=4294967295 -k delete"
	# Use escaped BRE regex to specify rule group
	GROUP="\(rmdir\|unlink\|rename\)"
	FULL_RULE="-a always,exit -F arch=$ARCH -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>=500 -F auid!=4294967295 -k delete"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

Ensure auditd Collects System Administrator Actionsrule

At a minimum the audit system should collect administrator actions for all users and root. Add the following to /etc/audit/audit.rules:

-w /etc/sudoers -p wa -k actions

Rationale:

The actions taken by system administrators should be audited to keep a record of what was executed on the system, as well as, for accountability purposes.

identifiers:  CCE-26662-7, DISA FSO RHEL-06-000201

references:  AC-2(7)(b), AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126, Test attestation on 20121024 by DS

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# Perform the remediation
fix_audit_watch_rule "auditctl" "/etc/sudoers" "wa" "actions"

Ensure auditd Collects Information on Kernel Module Loading and Unloadingrule

Add the following to /etc/audit/audit.rules in order to capture kernel module loading and unloading events, setting ARCH to either b32 or b64 as appropriate for your system:

-w /sbin/insmod -p x -k modules
-w /sbin/rmmod -p x -k modules
-w /sbin/modprobe -p x -k modules
-a always,exit -F arch=ARCH -S init_module -S delete_module -k modules

Rationale:

The addition/removal of kernel modules can be used to alter the behavior of the kernel and potentially introduce malicious code into kernel space. It is important to have an audit trail of modules that have been introduced into the kernel.

identifiers:  CCE-26611-4, DISA FSO RHEL-06-000202

references:  AC-3(10), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-12(a), AU-12(c), IR-5, 126

Remediation script:

# Include source function library.
. /usr/share/scap-security-guide/remediation_functions

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
# Note: 32-bit kernel modules can't be loaded / unloaded on 64-bit kernel =>
#       it's not required on a 64-bit system to check also for the presence
#       of 32-bit's equivalent of the corresponding rule. Therefore for
#       each system it's enought to check presence of system's native rule form.
[ $(getconf LONG_BIT) = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S .* -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="\(init\|delete\)_module"
	FULL_RULE="-a always,exit -F arch=$ARCH -S init_module -S delete_module -k modules"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

# Then perform the remediations for the watch rules
fix_audit_watch_rule "auditctl" "/sbin/insmod" "x" "modules"
fix_audit_watch_rule "auditctl" "/sbin/rmmod" "x" "modules"
fix_audit_watch_rule "auditctl" "/sbin/modprobe" "x" "modules"

Enable auditd Servicerule

The auditd service is an essential userspace component of the Linux Auditing System, as it is responsible for writing audit records to disk. The auditd service can be enabled with the following command:

$ sudo chkconfig --level 2345 auditd on

Rationale:

Ensuring the auditd service is active ensures audit records generated by the kernel can be written to disk, or that appropriate actions will be taken if other obstacles exist.

identifiers:  CCE-27058-7, DISA FSO RHEL-06-000145

references:  AC-17(1), AU-1(b), AU-10, AU-12(a), AU-12(c), IR-5, 347, 157, 172, 880, 1353, 1462, 1487, 1115, 1454, 067, 158, 831, 1190, 1312, 1263, 130, 120, 1589, Test attestation on 20121024 by DS

Remediation script:
#
# Enable auditd for all run levels
#
/sbin/chkconfig --level 0123456 auditd on

#
# Start auditd if not currently running
#
/sbin/service auditd start

Enable Auditing for Processes Which Start Prior to the Audit Daemonrule

To ensure all processes can be audited, even those which start prior to the audit daemon, add the argument audit=1 to the kernel line in /etc/grub.conf, in the manner below:

kernel /vmlinuz-version ro vga=ext root=/dev/VolGroup00/LogVol00 rhgb quiet audit=1

Rationale:

Each process on the system carries an "auditable" flag which indicates whether its activities can be audited. Although auditd takes care of enabling this for all processes which launch after it does, adding the kernel argument ensures it is set for every process during boot.

identifiers:  CCE-26785-6, DISA FSO RHEL-06-000525

references:  AC-17(1), AU-14(1), AU-1(b), AU-2(a), AU-2(c), AU-2(d), AU-10, IR-5, 1464, 130

Remediation script:
/sbin/grubby --update-kernel=ALL --args="audit=1"

Servicesgroup

The best protection against vulnerable software is running less software. This section describes how to review the software which Red Hat Enterprise Linux 6 installs on a system and disable software which is not needed. It then enumerates the software packages installed on a default RHEL 6 system and provides guidance about which ones can be safely disabled.

RHEL 6 provides a convenient minimal install option that essentially installs the bare necessities for a functional system. When building RHEL 6 servers, it is highly recommended to select the minimal packages and then build up the system from there.

contains 53 rules

Obsolete Servicesgroup

This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best available guidance for some time. As a result of this, many of these services are not installed as part of RHEL 6 by default.

Organizations which are running these services should switch to more secure equivalents as soon as possible. If it remains absolutely necessary to run one of these services for legacy reasons, care should be taken to restrict the service as much as possible, for instance by configuring host firewall software such as iptables to restrict access to the vulnerable service to only those remote hosts which have a known need to use it.

contains 14 rules

Xinetdgroup

The xinetd service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been largely obsoleted by other features, and it is not installed by default. The older Inetd service is not even available as part of RHEL 6.

contains 2 rules

Disable xinetd Servicerule

The xinetd service can be disabled with the following command:

$ sudo chkconfig xinetd off

Rationale:

The xinetd service provides a dedicated listener service for some programs, which is no longer necessary for commonly-used network services. Disabling it ensures that these uncommon services are not running, and also prevents attacks against xinetd itself.

identifiers:  CCE-27046-2, DISA FSO RHEL-06-000203

references:  CM-7, 305, Test attestation on 20121026 by DS

Uninstall xinetd Packagerule

The xinetd package can be uninstalled with the following command:

$ sudo yum erase xinetd

Rationale:

Removing the xinetd package decreases the risk of the xinetd service's accidental (or intentional) activation.

identifiers:  CCE-27005-8, DISA FSO RHEL-06-000204

references:  CM-7, 305, Test attestation on 20121026 by DS

Remediation script:
if rpm -qa | grep -q xinetd; then
	yum -y remove xinetd
fi

Telnetgroup

The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use telnet should be actively working to migrate to a more secure protocol.

contains 2 rules

Disable telnet Servicerule

The telnet service can be disabled with the following command:

$ sudo chkconfig telnet off

Rationale:

The telnet protocol uses unencrypted network communication, which means that data from the login session, including passwords and all other information transmitted during the session, can be stolen by eavesdroppers on the network. The telnet protocol is also subject to man-in-the-middle attacks.

identifiers:  CCE-26836-7, DISA FSO RHEL-06-000211

references:  CM-7, IA-5(1)(c), 68, 1436, 197, 877, 888, Test attestation on 20121026 by DS

Uninstall telnet-server Packagerule

The telnet-server package can be uninstalled with the following command:

$ sudo yum erase telnet-server

Rationale:

Removing the telnet-server package decreases the risk of the telnet service's accidental (or intentional) activation.

identifiers:  CCE-27073-6, DISA FSO RHEL-06-000206

references:  CM-7, 305, 381, Test attestation on 20121026 by DS

Remediation script:
if rpm -qa | grep -q telnet-server; then
	yum -y remove telnet-server
fi

Rlogin, Rsh, and Rexecgroup

The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.

contains 5 rules

Uninstall rsh-server Packagerule

The rsh-server package can be uninstalled with the following command:

$ sudo yum erase rsh-server

Rationale:

The rsh-server package provides several obsolete and insecure network services. Removing it decreases the risk of those services' accidental (or intentional) activation.

identifiers:  CCE-27062-9, DISA FSO RHEL-06-000213

references:  CM-7, 305, 381, Test attestation on 20121026 by DS

Remediation script:
yum -y erase rsh-server

Disable rexec Servicerule

The rexec service, which is available with the rsh-server package and runs as a service through xinetd, should be disabled. The rexec service can be disabled with the following command:

$ sudo chkconfig rexec off

Rationale:

The rexec service uses unencrypted network communications, which means that data from the login session, including passwords and all other information transmitted during the session, can be stolen by eavesdroppers on the network.

identifiers:  CCE-27208-8, DISA FSO RHEL-06-000216

references:  CM-7, 68, 1436, Test attestation on 20121026 by DS

Disable rsh Servicerule

The rsh service, which is available with the rsh-server package and runs as a service through xinetd, should be disabled. The rsh service can be disabled with the following command:

$ sudo chkconfig rsh off

Rationale:

The rsh service uses unencrypted network communications, which means that data from the login session, including passwords and all other information transmitted during the session, can be stolen by eavesdroppers on the network.

identifiers:  CCE-26994-4, DISA FSO RHEL-06-000214

references:  CM-7, IA-5(1)(c), 68, 1436, Test attestation on 20121026 by DS

Disable rlogin Servicerule

The rlogin service, which is available with the rsh-server package and runs as a service through xinetd, should be disabled. The rlogin service can be disabled with the following command:

$ sudo chkconfig rlogin off

Rationale:

The rlogin service uses unencrypted network communications, which means that data from the login session, including passwords and all other information transmitted during the session, can be stolen by eavesdroppers on the network.

identifiers:  CCE-26865-6, DISA FSO RHEL-06-000218

references:  CM-7, IA-5(1)(c), 1436, Test attestation on 20121026 by DS

Remove Rsh Trust Filesrule

The files /etc/hosts.equiv and ~/.rhosts (in each user's home directory) list remote hosts and users that are trusted by the local system when using the rshd daemon. To remove these files, run the following command to delete them from any location:

$ sudo rm /etc/hosts.equiv
$ rm ~/.rhosts

Rationale:

Trust files are convenient, but when used in conjunction with the R-services, they can allow unauthenticated access to a system.

identifiers:  CCE-27270-8, DISA FSO RHEL-06-000019

references:  CM-7, 1436, Test attestation on 20121026 by DS

Remediation script:
find -type f -name .rhosts -exec rm -f '{}' \;
rm /etc/hosts.equiv

NISgroup

The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS should not be used because it suffers from security problems inherent in its design, such as inadequate protection of important authentication information.

contains 2 rules

Uninstall ypserv Packagerule

The ypserv package can be uninstalled with the following command:

$ sudo yum erase ypserv

Rationale:

Removing the ypserv package decreases the risk of the accidental (or intentional) activation of NIS or NIS+ services.

identifiers:  CCE-27079-3, DISA FSO RHEL-06-000220

references:  CM-7, 305, 381, Test attestation on 20121026 by DS

Remediation script:
if rpm -qa | grep -q ypserv; then
	yum -y remove ypserv
fi

Disable ypbind Servicerule

The ypbind service, which allows the system to act as a client in a NIS or NIS+ domain, should be disabled. The ypbind service can be disabled with the following command:

$ sudo chkconfig ypbind off

Rationale:

Disabling the ypbind service ensures the system is not acting as a client in a NIS or NIS+ domain.

identifiers:  CCE-26894-6, DISA FSO RHEL-06-000221

references:  CM-7, 305, Test attestation on 20121026 by DS

TFTP Servergroup

TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides little security, and modern versions of networking operating systems frequently support configuration via SSH or other more secure protocols. A TFTP server should be run only if no more secure method of supporting existing equipment can be found.

contains 3 rules

Disable tftp Servicerule

The tftp service should be disabled. The tftp service can be disabled with the following command:

$ sudo chkconfig tftp off

Rationale:

Disabling the tftp service ensures the system is not acting as a TFTP server, which does not provide encryption or authentication.

identifiers:  CCE-27055-3, DISA FSO RHEL-06-000223

references:  CM-7, 1436, Test attestation on 20121026 by DS

Remediation script:
#
# Disable tftp for all run levels
#
/sbin/chkconfig --level 0123456 tftp off

#
# Stop tftp if currently running
#
/sbin/service tftp stop

Uninstall tftp-server Packagerule

The tftp-server package can be removed with the following command:

$ sudo yum erase tftp-server

Rationale:

Removing the tftp-server package decreases the risk of the accidental (or intentional) activation of tftp services.

identifiers:  CCE-26946-4, DISA FSO RHEL-06-000222

references:  CM-7, 305, Test attestation on 20121026 by DS

Ensure tftp Daemon Uses Secure Moderule

If running the tftp service is necessary, it should be configured to change its root directory at startup. To do so, ensure /etc/xinetd.d/tftp includes -s as a command line argument, as shown in the following example (which is also the default):

server_args = -s /var/lib/tftpboot

Rationale:

Using the -s option causes the TFTP service to only serve files from the given directory. Serving files from an intentionally-specified directory reduces the risk of sharing files which should remain private.

identifiers:  CCE-27272-4, DISA FSO RHEL-06-000338

references:  CM-7, 366

Base Servicesgroup

This section addresses the base services that are installed on a RHEL 6 default installation which are not covered in other sections. Some of these services listen on the network and should be treated with particular discretion. Other services are local system utilities that may or may not be extraneous. In general, system services should be disabled if not required.

contains 7 rules

Disable Automatic Bug Reporting Tool (abrtd)rule

The Automatic Bug Reporting Tool (abrtd) daemon collects and reports crash data when an application crash is detected. Using a variety of plugins, abrtd can email crash reports to system administrators, log crash reports to files, or forward crash reports to a centralized issue tracking system such as RHTSupport. The abrtd service can be disabled with the following command:

$ sudo chkconfig abrtd off

Rationale:

Mishandling crash data could expose sensitive information about vulnerabilities in software executing on the local machine, as well as sensitive information from within a process's address space or registers.

identifiers:  CCE-27247-6, DISA FSO RHEL-06-000261

references:  CM-7, 381

Remediation script:
#
# Disable abrtd for all run levels
#
/sbin/chkconfig --level 0123456 abrtd off

#
# Stop abrtd if currently running
#
/sbin/service abrtd stop

Disable Network Console (netconsole)rule

The netconsole service is responsible for loading the netconsole kernel module, which logs kernel printk messages over UDP to a syslog server. This allows debugging of problems where disk logging fails and serial consoles are impractical. The netconsole service can be disabled with the following command:

$ sudo chkconfig netconsole off

Rationale:

The netconsole service is not necessary unless there is a need to debug kernel panics, which is not common.

identifiers:  CCE-27254-2, DISA FSO RHEL-06-000289

references:  CM-7, 381

Remediation script:
#
# Disable netconsole for all run levels
#
/sbin/chkconfig --level 0123456 netconsole off

#
# Stop netconsole if currently running
#
/sbin/service netconsole stop

Disable ntpdate Service (ntpdate)rule

The ntpdate service sets the local hardware clock by polling NTP servers when the system boots. It synchronizes to the NTP servers listed in /etc/ntp/step-tickers or /etc/ntp.conf and then sets the local hardware clock to the newly synchronized system time. The ntpdate service can be disabled with the following command:

$ sudo chkconfig ntpdate off

Rationale:

The ntpdate service may only be suitable for systems which are rebooted frequently enough that clock drift does not cause problems between reboots. In any event, the functionality of the ntpdate service is now available in the ntpd program and should be considered deprecated.

identifiers:  CCE-27256-7, DISA FSO RHEL-06-000265

references:  CM-7, 382, Test attestation on 20121024 by DS

Disable Odd Job Daemon (oddjobd)rule

The oddjobd service exists to provide an interface and access control mechanism through which specified privileged tasks can run tasks for unprivileged client applications. Communication with oddjobd through the system message bus. The oddjobd service can be disabled with the following command:

$ sudo chkconfig oddjobd off

Rationale:

The oddjobd service may provide necessary functionality in some environments, and can be disabled if it is not needed. Execution of tasks by privileged programs, on behalf of unprivileged ones, has traditionally been a source of privilege escalation security issues.

identifiers:  CCE-27257-5, DISA FSO RHEL-06-000266

references:  CM-7, 381, Test attestation on 20121024 by DS

Remediation script:
#
# Disable oddjobd for all run levels
#
/sbin/chkconfig --level 0123456 oddjobd off

#
# Stop oddjobd if currently running
#
/sbin/service oddjobd stop

Disable Apache Qpid (qpidd)rule

The qpidd service provides high speed, secure, guaranteed delivery services. It is an implementation of the Advanced Message Queuing Protocol. By default the qpidd service will bind to port 5672 and listen for connection attempts. The qpidd service can be disabled with the following command:

$ sudo chkconfig qpidd off

Rationale:

The qpidd service is automatically installed when the "base" package selection is selected during installation. The qpidd service listens for network connections, which increases the attack surface of the system. If the system is not intended to receive AMQP traffic, then the qpidd service is not needed and should be disabled or removed.

identifiers:  CCE-26928-2, DISA FSO RHEL-06-000267

references:  CM-7, 382

Remediation script:
#
# Disable qpidd for all run levels
#
/sbin/chkconfig --level 0123456 qpidd off

#
# Stop qpidd if currently running
#
/sbin/service qpidd stop

Disable Network Router Discovery Daemon (rdisc)rule

The rdisc service implements the client side of the ICMP Internet Router Discovery Protocol (IRDP), which allows discovery of routers on the local subnet. If a router is discovered then the local routing table is updated with a corresponding default route. By default this daemon is disabled. The rdisc service can be disabled with the following command:

$ sudo chkconfig rdisc off

Rationale:

General-purpose systems typically have their network and routing information configured statically by a system administrator. Workstations or some special-purpose systems often use DHCP (instead of IRDP) to retrieve dynamic network configuration information.

identifiers:  CCE-27261-7, DISA FSO RHEL-06-000268

references:  AC-4, CM-7, 382, Test attestation on 20121024 by DS

Remediation script:
#
# Disable rdisc for all run levels
#
/sbin/chkconfig --level 0123456 rdisc off

#
# Stop rdisc if currently running
#
/sbin/service rdisc stop

Disable Red Hat Network Service (rhnsd)rule

The Red Hat Network service automatically queries Red Hat Network servers to determine whether there are any actions that should be executed, such as package updates. This only occurs if the system was registered to an RHN server or satellite and managed as such. The rhnsd service can be disabled with the following command:

$ sudo chkconfig rhnsd off

Rationale:

Although systems management and patching is extremely important to system security, management by a system outside the enterprise enclave is not desirable for some environments. However, if the system is being managed by RHN or RHN Satellite Server the rhnsd daemon can remain on.

identifiers:  CCE-26846-6, DISA FSO RHEL-06-000009

references:  CM-7, 382, Test attestation on 20121024 by DS

Remediation script:
#
# Disable rhnsd for all run levels
#
/sbin/chkconfig --level 0123456 rhnsd off

#
# Stop rhnsd if currently running
#
/sbin/service rhnsd stop

Cron and At Daemonsgroup

The cron and at services are used to allow commands to be executed at a later time. The cron service is required by almost all systems to perform necessary maintenance tasks, while at may or may not be required on a given system. Both daemons should be configured defensively.

contains 1 rule

Enable cron Servicerule

The crond service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system activity. The crond service can be enabled with the following command:

$ sudo chkconfig --level 2345 crond on

Rationale:

Due to its usage for maintenance and security-supporting tasks, enabling the cron daemon is essential.

identifiers:  CCE-27070-2, DISA FSO RHEL-06-000224

references:  CM-7, Test attestation on 20121024 by DS

Remediation script:
#
# Enable crond for all run levels
#
/sbin/chkconfig --level 0123456 crond on

#
# Start crond if not currently running
#
/sbin/service crond start

SSH Servergroup

The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, through the use of public key cryptography. The implementation included with the system is called OpenSSH, and more detailed documentation is available from its website, http://www.openssh.org. Its server program is called sshd and provided by the RPM package openssh-server.

contains 10 rules

Configure OpenSSH Server if Necessarygroup

If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file /etc/ssh/sshd_config. The following recommendations can be applied to this file. See the sshd_config(5) man page for more detailed information.

contains 10 rules

Allow Only SSH Protocol 2rule

Only SSH protocol version 2 connections should be permitted. The default setting in /etc/ssh/sshd_config is correct, and can be verified by ensuring that the following line appears:

Protocol 2

Rationale:

SSH protocol version 1 suffers from design flaws that result in security vulnerabilities and should not be used.

identifiers:  CCE-27072-8, DISA FSO RHEL-06-000227

references:  AC-3(10), IA-5(1)(c), 776, 774, 1436, Test attestation on 20121024 by DS

Remediation script:
grep -qi ^Protocol /etc/ssh/sshd_config && \
  sed -i "s/Protocol.*/Protocol 2/gI" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "Protocol 2" >> /etc/ssh/sshd_config
fi

Set SSH Idle Timeout Intervalrule

SSH allows administrators to set an idle timeout interval. After this interval has passed, the idle user will be automatically logged out.

To set an idle timeout interval, edit the following line in /etc/ssh/sshd_config as follows:

ClientAliveInterval 15
The timeout interval is given in seconds. To have a timeout of 15 minutes, set interval to 900.

If a shorter timeout has already been set for the login shell, that value will preempt any SSH setting made here. Keep in mind that some processes may stop SSH from correctly detecting that the user is idle.

Rationale:

Causing idle users to be automatically logged out guards against compromises one system leading trivially to compromises on another.

identifiers:  CCE-26919-1, DISA FSO RHEL-06-000230

references:  AC-2(5), SA-8, 879, 1133, Test attestation on 20121024 by DS

Remediation script:
sshd_idle_timeout_value="15"
grep -q ^ClientAliveInterval /etc/ssh/sshd_config && \
  sed -i "s/ClientAliveInterval.*/ClientAliveInterval $sshd_idle_timeout_value/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "ClientAliveInterval $sshd_idle_timeout_value" >> /etc/ssh/sshd_config
fi

Set SSH Client Alive Countrule

To ensure the SSH idle timeout occurs precisely when the ClientAliveCountMax is set, edit /etc/ssh/sshd_config as follows:

ClientAliveCountMax 0

Rationale:

This ensures a user login will be terminated as soon as the ClientAliveCountMax is reached.

identifiers:  CCE-26282-4, DISA FSO RHEL-06-000231

references:  AC-2(5), SA-8, 879, 1133, Test attestation on 20121024 by DS

Remediation script:
grep -q ^ClientAliveCountMax /etc/ssh/sshd_config && \
  sed -i "s/ClientAliveCountMax.*/ClientAliveCountMax 0/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "ClientAliveCountMax 0" >> /etc/ssh/sshd_config
fi

Disable SSH Support for .rhosts Filesrule

SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via .rhosts files.

To ensure this behavior is disabled, add or correct the following line in /etc/ssh/sshd_config:

IgnoreRhosts yes

Rationale:

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

identifiers:  CCE-27124-7, DISA FSO RHEL-06-000234

references:  AC-3, 765, 766

Remediation script:
grep -q ^IgnoreRhosts /etc/ssh/sshd_config && \
  sed -i "s/IgnoreRhosts.*/IgnoreRhosts yes/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "IgnoreRhosts yes" >> /etc/ssh/sshd_config
fi

Disable Host-Based Authenticationrule

SSH's cryptographic host-based authentication is more secure than .rhosts authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organization.

To disable host-based authentication, add or correct the following line in /etc/ssh/sshd_config:

HostbasedAuthentication no

Rationale:

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

identifiers:  CCE-27091-8, DISA FSO RHEL-06-000236

references:  AC-3, 765, 766, Test attestation on 20121024 by DS

Remediation script:
grep -q ^HostbasedAuthentication /etc/ssh/sshd_config && \
  sed -i "s/HostbasedAuthentication.*/HostbasedAuthentication no/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "HostbasedAuthentication no" >> /etc/ssh/sshd_config
fi

Disable SSH Access via Empty Passwordsrule

To explicitly disallow remote login from accounts with empty passwords, add or correct the following line in /etc/ssh/sshd_config:

PermitEmptyPasswords no
Any accounts with empty passwords should be disabled immediately, and PAM configuration should prevent users from being able to assign themselves empty passwords.

Rationale:

Configuring this setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.

identifiers:  CCE-26887-0, DISA FSO RHEL-06-000239

references:  AC-3, 765, 766, Test attestation on 20121024 by DS

Remediation script:
grep -q ^PermitEmptyPasswords /etc/ssh/sshd_config && \
  sed -i "s/PermitEmptyPasswords.*/PermitEmptyPasswords no/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "PermitEmptyPasswords no" >> /etc/ssh/sshd_config
fi

Enable SSH Warning Bannerrule

To enable the warning banner and ensure it is consistent across the system, add or correct the following line in /etc/ssh/sshd_config:

Banner /etc/issue
Another section contains information on how to create an appropriate system-wide warning banner.

Rationale:

The warning message reinforces policy awareness during the login process and facilitates possible legal action against attackers. Alternatively, systems whose ownership should not be obvious should ensure usage of a banner that does not provide easy attribution.

identifiers:  CCE-27112-2, DISA FSO RHEL-06-000240

references:  AC-8(a), 48, Test attestation on 20121024 by DS

Remediation script:
grep -q ^Banner /etc/ssh/sshd_config && \
  sed -i "s/Banner.*/Banner \/etc\/issue/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "Banner /etc/issue" >> /etc/ssh/sshd_config
fi

Do Not Allow SSH Environment Optionsrule

To ensure users are not able to present environment options to the SSH daemon, add or correct the following line in /etc/ssh/sshd_config:

PermitUserEnvironment no

Rationale:

SSH environment options potentially allow users to bypass access restriction in some configurations.

identifiers:  CCE-27201-3, DISA FSO RHEL-06-000241

references:  1414, Test attestation on 20121024 by DS

Remediation script:
grep -q ^PermitUserEnvironment /etc/ssh/sshd_config && \
  sed -i "s/PermitUserEnvironment.*/PermitUserEnvironment no/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "PermitUserEnvironment no" >> /etc/ssh/sshd_config
fi

Use Only Approved Ciphersrule

Limit the ciphers to those algorithms which are FIPS-approved. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved ciphers:

Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
The man page sshd_config(5) contains a list of supported ciphers.

Rationale:

Approved algorithms should impart some level of confidence in their implementation. These are also required for compliance.

identifiers:  CCE-26555-3, DISA FSO RHEL-06-000243

references:  AC-3, AC-17(2), SI-7, IA-5(1)(c), IA-7, 803, 1144, 1145, 1146, Test attestation on 20121024 by DS

Remediation script:
grep -q ^Ciphers /etc/ssh/sshd_config && \
  sed -i "s/Ciphers.*/Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc" >> /etc/ssh/sshd_config
fi

X Window Systemgroup

The X Window System implementation included with the system is called X.org.

contains 2 rules

Disable X Windowsgroup

Unless there is a mission-critical reason for the system to run a graphical user interface, ensure X is not set to start automatically at boot and remove the X Windows software packages. There is usually no reason to run X Windows on a dedicated server machine, as it increases the system's attack surface and consumes system resources. Administrators of server systems should instead login via SSH or on the text console.

contains 2 rules

Disable X Windows Startup By Setting Runlevelrule

Setting the system's runlevel to 3 will prevent automatic startup of the X server. To do so, ensure the following line in /etc/inittab features a 3 as shown:

id:3:initdefault:

Rationale:

Unnecessary services should be disabled to decrease the attack surface of the system.

identifiers:  CCE-27119-7, DISA FSO RHEL-06-000290

references:  AC-3, 366, Test attestation on 20121025 by DS

Remove the X Windows Package Grouprule

Removing all packages which constitute the X Window System ensures users or malicious software cannot start X. To do so, run the following command:

$ sudo yum groupremove "X Window System"

Rationale:

Unnecessary packages should not be installed to decrease the attack surface of the system.

identifiers:  CCE-27198-1, DISA FSO RHEL-06-000291

references:  366, Test attestation on 20121025 by DS

Avahi Servergroup

The Avahi daemon implements the DNS Service Discovery and Multicast DNS protocols, which provide service and host discovery on a network. It allows a system to automatically identify resources on the network, such as printers or web servers. This capability is also known as mDNSresponder and is a major part of Zeroconf networking.

contains 1 rule

Disable Avahi Server if Possiblegroup

Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Disabling it can reduce the system's vulnerability to such attacks.

contains 1 rule

Disable Avahi Server Softwarerule

The avahi-daemon service can be disabled with the following command:

$ sudo chkconfig avahi-daemon off

Rationale:

Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Its functionality is convenient but is only appropriate if the local network can be trusted.

identifiers:  CCE-27087-6, DISA FSO RHEL-06-000246

references:  CM-7, 366

DHCPgroup

The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server.

This guide recommends configuring networking on clients by manually editing the appropriate files under /etc/sysconfig. Use of DHCP can make client systems vulnerable to compromise by rogue DHCP servers, and should be avoided unless necessary. If using DHCP is necessary, however, there are best practices that should be followed to minimize security risk.

contains 1 rule

Disable DHCP Clientgroup

DHCP is the default network configuration method provided by the system installer, and common on many networks. Nevertheless, manual management of IP addresses for systems implies a greater degree of management and accountability for network activity.

contains 1 rule

Disable DHCP Clientrule

For each interface on the system (e.g. eth0), edit /etc/sysconfig/network-scripts/ifcfg-interface and make the following changes:

  • Correct the BOOTPROTO line to read:
    BOOTPROTO=none
  • Add or correct the following lines, substituting the appropriate values based on your site's addressing scheme:
    NETMASK=255.255.255.0
    IPADDR=192.168.1.2
    GATEWAY=192.168.1.1

Rationale:

DHCP relies on trusting the local network. If the local network is not trusted, then it should not be used. However, the automatic configuration provided by DHCP is commonly used and the alternative, manual configuration, presents an unacceptable burden in many circumstances.

identifiers:  CCE-27021-5, DISA FSO RHEL-06-000292

references:  CM-7, 366, Test attestation on 20121024 by DS

Network Time Protocolgroup

The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictably on unmanaged systems. Central time protocols can be used both to ensure that time is consistent among a network of machines, and that their time is consistent with the outside world.

If every system on a network reliably reports the same time, then it is much easier to correlate log messages in case of an attack. In addition, a number of cryptographic protocols (such as Kerberos) use timestamps to prevent certain types of attacks. If your network does not have synchronized time, these protocols may be unreliable or even unusable.

Depending on the specifics of the network, global time accuracy may be just as important as local synchronization, or not very important at all. If your network is connected to the Internet, using a public timeserver (or one provided by your enterprise) provides globally accurate timestamps which may be essential in investigating or responding to an attack which originated outside of your network.

A typical network setup involves a small number of internal systems operating as NTP servers, and the remainder obtaining time information from those internal servers.

More information on how to configure the NTP server software, including configuration of cryptographic authentication for time data, is available at http://www.ntp.org.

contains 2 rules

Enable the NTP Daemonrule

The ntpd service can be enabled with the following command:

$ sudo chkconfig --level 2345 ntpd on

Rationale:

Enabling the ntpd service ensures that the ntpd service will be running and that the system will synchronize its time to any servers specified. This is important whether the system is configured to be a client (and synchronize only its own clock) or it is also acting as an NTP server to other systems. Synchronizing time is essential for authentication services such as Kerberos, but it is also important for maintaining accurate logs and auditing possible security breaches.

The NTP daemon offers all of the functionality of ntpdate, which is now deprecated. Additional information on this is available at http://support.ntp.org/bin/view/Dev/DeprecatingNtpdate

identifiers:  CCE-27093-4, DISA FSO RHEL-06-000247

references:  AU-8(1), 160, Test attestation on 20121024 by DS

Remediation script:
#
# Enable ntpd for all run levels
#
/sbin/chkconfig --level 0123456 ntpd on

#
# Start ntpd if not currently running
#
/sbin/service ntpd start

Specify a Remote NTP Serverrule

To specify a remote NTP server for time synchronization, edit the file /etc/ntp.conf. Add or correct the following lines, substituting the IP or hostname of a remote NTP server for ntpserver:

server ntpserver
This instructs the NTP software to contact that remote server to obtain time data.

Rationale:

Synchronizing with an NTP server makes it possible to collate system logs from multiple sources or correlate computer events with real time events.

identifiers:  CCE-27098-3, DISA FSO RHEL-06-000248

references:  AU-8(1), 160, Test attestation on 20121024 by DS

Mail Server Softwaregroup

Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that machines are not running MTAs unnecessarily, and configure needed MTAs as defensively as possible.

Very few systems at any site should be configured to directly receive email over the network. Users should instead use mail client programs to retrieve email from a central server that supports protocols such as IMAP or POP3. However, it is normal for most systems to be independently capable of sending email, for instance so that cron jobs can report output to an administrator. Most MTAs, including Postfix, support a submission-only mode in which mail can be sent from the local system to a central site MTA (or directly delivered to a local account), but the system still cannot receive mail directly over a network.

The alternatives program in RHEL permits selection of other mail server software (such as Sendmail), but Postfix is the default and is preferred. Postfix was coded with security in mind and can also be more effectively contained by SELinux as its modular design has resulted in separate processes performing specific actions. More information is available on its website, http://www.postfix.org.

contains 3 rules

Configure SMTP For Mail Clientsgroup

This section discusses settings for Postfix in a submission-only e-mail configuration.

contains 1 rule

Disable Postfix Network Listeningrule

Edit the file /etc/postfix/main.cf to ensure that only the following inet_interfaces line appears:

inet_interfaces = localhost

Rationale:

This ensures postfix accepts mail messages (such as cron job reports) from the local system only, and not from the network, which protects it from network attack.

identifiers:  CCE-26780-7, DISA FSO RHEL-06-000249

references:  CM-7, 382, Test attestation on 20121024 by DS

Enable Postfix Servicerule

The Postfix mail transfer agent is used for local mail delivery within the system. The default configuration only listens for connections to the default SMTP port (port 25) on the loopback interface (127.0.0.1). It is recommended to leave this service enabled for local mail delivery. The postfix service can be enabled with the following command:

$ sudo chkconfig --level 2345 postfix on

Rationale:

Local mail delivery is essential to some system maintenance and notification tasks.

identifiers:  CCE-26325-1, DISA FSO RHEL-06-000287

references:  Test attestation on 20121024 by DS

Remediation script:
#
# Enable postfix for all run levels
#
/sbin/chkconfig --level 0123456 postfix on

#
# Start postfix if not currently running
#
/sbin/service postfix start

Uninstall Sendmail Packagerule

Sendmail is not the default mail transfer agent and is not installed by default. The sendmail package can be removed with the following command:

$ sudo yum erase sendmail

Rationale:

The sendmail software was not developed with security in mind and its design prevents it from being effectively contained by SELinux. Postfix should be used instead.

identifiers:  CCE-27515-6, DISA FSO RHEL-06-000288

references:  CM-7, Test attestation on 20121024 by DS

LDAPgroup

LDAP is a popular directory service, that is, a standardized way of looking up information from a central database. RHEL 6 includes software that enables a system to act as both an LDAP client and server.

contains 3 rules

Configure OpenLDAP Clientsgroup

This section provides information on which security settings are important to configure in OpenLDAP clients by manually editing the appropriate configuration files. RHEL 6 provides an automated configuration tool called authconfig and a graphical wrapper for authconfig called system-config-authentication. However, these tools do not provide as much control over configuration as manual editing of configuration files. The authconfig tools do not allow you to specify locations of SSL certificate files, which is useful when trying to use SSL cleanly across several protocols. Installation and configuration of OpenLDAP on RHEL 6 is available at https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/ch-Directory_Servers.html.

warning  Before configuring any system to be an LDAP client, ensure that a working LDAP server is present on the network.
contains 2 rules

Configure LDAP Client to Use TLS For All Transactionsrule

Configure LDAP to enforce TLS use. First, edit the file /etc/pam_ldap.conf, and add or correct the following lines:

ssl start_tls
Then review the LDAP server and ensure TLS has been configured.

Rationale:

The ssl directive specifies whether to use ssl or not. If not specified it will default to no. It should be set to start_tls rather than doing LDAP over SSL.

identifiers:  CCE-26690-8, DISA FSO RHEL-06-000252

references:  CM-7, 776, 778, 1453, Test attestation on 20121024 by DS

Configure Certificate Directives for LDAP Use of TLSrule

Ensure a copy of a trusted CA certificate has been placed in the file /etc/pki/tls/CA/cacert.pem. Configure LDAP to enforce TLS use and to trust certificates signed by that CA. First, edit the file /etc/pam_ldap.conf, and add or correct either of the following lines:

tls_cacertdir /etc/pki/tls/CA
or
tls_cacertfile /etc/pki/tls/CA/cacert.pem
Then review the LDAP server and ensure TLS has been configured.

Rationale:

The tls_cacertdir or tls_cacertfile directives are required when tls_checkpeer is configured (which is the default for openldap versions 2.1 and up). These directives define the path to the trust certificates signed by the site CA.

identifiers:  CCE-27189-0, DISA FSO RHEL-06-000253

references:  CM-7, 776, 778, 1453, Test attestation on 20121024 by DS

Configure OpenLDAP Servergroup

This section details some security-relevant settings for an OpenLDAP server. Installation and configuration of OpenLDAP on RHEL 6 is available at: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/ch-Directory_Servers.html.

contains 1 rule

Uninstall openldap-servers Packagerule

The openldap-servers package should be removed if not in use. Is this machine the OpenLDAP server? If not, remove the package.

$ sudo yum erase openldap-servers
The openldap-servers RPM is not installed by default on RHEL 6 machines. It is needed only by the OpenLDAP server, not by the clients which use LDAP for authentication. If the system is not intended for use as an LDAP Server it should be removed.

Rationale:

Unnecessary packages should not be installed to decrease the attack surface of the system. While this software is clearly essential on an LDAP server, it is not necessary on typical desktop or workstation systems.

identifiers:  CCE-26858-1, DISA FSO RHEL-06-000256

references:  CM-7, 366, Test attestation on 20121024 by DS

NFS and RPCgroup

The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circumstances under which it is possible to disable NFS and its dependencies, and then details steps which should be taken to secure NFS's configuration. This section is relevant to machines operating as NFS clients, as well as to those operating as NFS servers.

contains 3 rules

Configure NFS Clientsgroup

The steps in this section are appropriate for machines which operate as NFS clients.

contains 2 rules

Mount Remote Filesystems with Restrictive Optionsgroup

Edit the file /etc/fstab. For each filesystem whose type (column 3) is nfs or nfs4, add the text ,nodev,nosuid to the list of mount options in column 4. If appropriate, also add ,noexec.

See the section titled "Restrict Partition Mount Options" for a description of the effects of these options. In general, execution of files mounted via NFS should be considered risky because of the possibility that an adversary could intercept the request and substitute a malicious file. Allowing setuid files to be executed from remote servers is particularly risky, both for this reason and because it requires the clients to extend root-level trust to the NFS server.

contains 2 rules

Mount Remote Filesystems with nodevrule

Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of any NFS mounts.

Rationale:

Legitimate device files should only exist in the /dev directory. NFS mounts should not present device files to users.

identifiers:  CCE-27090-0, DISA FSO RHEL-06-000269

references:  CM-7, MP-2, Test attestation on 20121025 by DS

Mount Remote Filesystems with nosuidrule

Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of any NFS mounts.

Rationale:

NFS mounts should not present suid binaries to users. Only vendor-supplied suid executables should be installed to their default location on the local filesystem.

identifiers:  CCE-26972-0, DISA FSO RHEL-06-000270

references:  Test attestation on 20121025 by DS

Configure NFS Serversgroup

The steps in this section are appropriate for machines which operate as NFS servers.

contains 1 rule

Ensure Insecure File Locking is Not Allowedrule

By default the NFS server requires secure file-lock requests, which require credentials from the client in order to lock a file. Most NFS clients send credentials with file lock requests, however, there are a few clients that do not send credentials when requesting a file-lock, allowing the client to only be able to lock world-readable files. To get around this, the insecure_locks option can be used so these clients can access the desired export. This poses a security risk by potentially allowing the client access to data for which it does not have authorization. Remove any instances of the insecure_locks option from the file /etc/exports.

Rationale:

Allowing insecure file locking could allow for sensitive data to be viewed or edited by an unauthorized user.

identifiers:  CCE-27167-6, DISA FSO RHEL-06-000309

references:  764

FTP Servergroup

FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data transmitted during the session can be captured and that the session is vulnerable to hijacking. Therefore, running the FTP server software is not recommended.

However, there are some FTP server configurations which may be appropriate for some environments, particularly those which allow only read-only anonymous access as a means of downloading data available to the public.

contains 2 rules

Use vsftpd to Provide FTP Service if Necessarygroup

The primary vsftpd configuration file is /etc/vsftpd.conf, if that file exists, or /etc/vsftpd/vsftpd.conf if it does not.

contains 2 rules

Enable Logging of All FTP Transactionsrule

Add or correct the following configuration options within the vsftpd configuration file, located at /etc/vsftpd/vsftpd.conf:

xferlog_enable=YES
xferlog_std_format=NO
log_ftp_protocol=YES

warning  If verbose logging to vsftpd.log is done, sparse logging of downloads to /var/log/xferlog will not also occur. However, the information about what files were downloaded is included in the information logged to vsftpd.log
Rationale:

To trace malicious activity facilitated by the FTP service, it must be configured to ensure that all commands sent to the FTP server are logged using the verbose vsftpd log format. The default vsftpd log file is /var/log/vsftpd.log.

identifiers:  CCE-27142-9, DISA FSO RHEL-06-000339

Create Warning Banners for All FTP Usersrule

Edit the vsftpd configuration file, which resides at /etc/vsftpd/vsftpd.conf by default. Add or correct the following configuration options:

banner_file=/etc/issue

Rationale:

This setting will cause the system greeting banner to be used for FTP connections as well.

identifiers:  CCE-27145-2, DISA FSO RHEL-06-000348

references:  48

Samba(SMB) Microsoft Windows File Sharing Servergroup

When properly configured, the Samba service allows Linux machines to provide file and print sharing to Microsoft Windows machines. There are two software packages that provide Samba support. The first, samba-client, provides a series of command line tools that enable a client machine to access Samba shares. The second, simply labeled samba, provides the Samba service. It is this second package that allows a Linux machine to act as an Active Directory server, a domain controller, or as a domain member. Only the samba-client package is installed by default.

contains 2 rules

Configure Samba if Necessarygroup

All settings for the Samba daemon can be found in /etc/samba/smb.conf. Settings are divided between a [global] configuration section and a series of user created share definition sections meant to describe file or print shares on the system. By default, Samba will operate in user mode and allow client machines to access local home directories and printers. It is recommended that these settings be changed or that additional limitations be set in place.

contains 2 rules

Require Client SMB Packet Signing, if using smbclientrule

To require samba clients running smbclient to use packet signing, add the following to the [global] section of the Samba configuration file, /etc/samba/smb.conf:

client signing = mandatory
Requiring samba clients such as smbclient to use packet signing ensures they can only communicate with servers that support packet signing.

Rationale:

Packet signing can prevent man-in-the-middle attacks which modify SMB packets in transit.

identifiers:  CCE-26328-5, DISA FSO RHEL-06-000272

Remediation script:
######################################################################
#By Luke "Brisk-OH" Brisk
#luke.brisk@boeing.com or luke.brisk@gmail.com
######################################################################

CLIENTSIGNING=$( grep -ic 'client signing' /etc/samba/smb.conf )

if [ "$CLIENTSIGNING" -eq 0 ];  then
	# Add to global section
	sed -i 's/\[global\]/\[global\]\n\n\tclient signing = mandatory/g' /etc/samba/smb.conf
else
	sed -i 's/[[:blank:]]*client[[:blank:]]signing[[:blank:]]*=[[:blank:]]*no/        client signing = mandatory/g' /etc/samba/smb.conf
fi

Require Client SMB Packet Signing, if using mount.cifsrule

Require packet signing of clients who mount Samba shares using the mount.cifs program (e.g., those who specify shares in /etc/fstab). To do so, ensure signing options (either sec=krb5i or sec=ntlmv2i) are used.

See the mount.cifs(8) man page for more information. A Samba client should only communicate with servers who can support SMB packet signing.

Rationale:

Packet signing can prevent man-in-the-middle attacks which modify SMB packets in transit.

identifiers:  CCE-26792-2, DISA FSO RHEL-06-000273

SNMP Servergroup

The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP were well-known for weak security, such as plaintext transmission of the community string (used for authentication) and usage of easily-guessable choices for the community string.

contains 2 rules

Configure SNMP Server if Necessarygroup

If it is necessary to run the snmpd agent on the system, some best practices should be followed to minimize the security risk from the installation. The multiple security models implemented by SNMP cannot be fully covered here so only the following general configuration advice can be offered:

  • use only SNMP version 3 security models and enable the use of authentication and encryption
  • write access to the MIB (Management Information Base) should be allowed only if necessary
  • all access to the MIB should be restricted following a principle of least privilege
  • network access should be limited to the maximum extent possible including restricting to expected network addresses both in the configuration files and in the system firewall rules
  • ensure SNMP agents send traps only to, and accept SNMP queries only from, authorized management stations
  • ensure that permissions on the snmpd.conf configuration file (by default, in /etc/snmp) are 640 or more restrictive
  • ensure that any MIB files' permissions are also 640 or more restrictive

contains 2 rules

Configure SNMP Service to Use Only SNMPv3 or Newer rule

Edit /etc/snmp/snmpd.conf, removing any references to rocommunity, rwcommunity, or com2sec. Upon doing that, restart the SNMP service:

$ sudo service snmpd restart

Rationale:

Earlier versions of SNMP are considered insecure, as they potentially allow unauthorized access to detailed system management information.

identifiers:  CCE-27365-6, DISA FSO RHEL-06-000340

Ensure Default Password Is Not Usedrule

Edit /etc/snmp/snmpd.conf, remove default community string public. Upon doing that, restart the SNMP service:

$ sudo service snmpd restart

Rationale:

Presence of the default SNMP password enables querying of different system aspects and could result in unauthorized knowledge of the system.

identifiers:  CCE-27593-3, DISA FSO RHEL-06-000341

references:  Test attestation on 20121214 by MAN

Red Hat and Red Hat Enterprise Linux are either registered trademarks or trademarks of Red Hat, Inc. in the United States and other countries. All other names are registered trademarks or trademarks of their respective companies.